interesting jam.


PDA






LIQUID SNAKE
December 24, 2008, 03:22 AM
My roommate Mike has this total POS GP35 (browning high power) that has never worked right since I've known him. Tonight he came back from shooting out back the house and showed me the most interesting jam I ever saw. One of the shell casings had flipped backwards in the chamber and jammed in. With the case head facing into the chamber the extractor was useless. The other Mike tapped it out later with a cleaning rod. I just had to tell this to others.

If you enjoyed reading about "interesting jam." here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Dr.Rob
December 24, 2008, 05:17 AM
Remove the extractor and clean the channel with a dental pick, it's probably gummed up.

22lr
December 24, 2008, 09:43 AM
Dang, ive never even heard of anything like that, way to weird.

Vonderek
December 24, 2008, 10:22 AM
If it's an old HP the internal extractor may need to be re-tensioned.

Ken Rainey
December 24, 2008, 01:06 PM
What I find interesting is someone referring to a Browning High Power as a POS....never heard that before....his BHP evidently needs some proper maintenance....;)

North of 49th
December 25, 2008, 01:18 AM
May I suggest cleaning and some maintenance and then perhaps the POS will reveal a nice gun(hopefully).;) That is a very interesting jam...

LIQUID SNAKE
December 25, 2008, 05:55 AM
Mike admits that he never cleans the thing. He also has a Winchester speed feed 12guage that he also never cleans. It doesn't work right aether. The only gun he has that works is the Cobray machine pistol. That's only because its a reliable enough design to go without maintenance.

notorious
December 25, 2008, 06:03 AM
I saw two guns jam like that last week. Both are Ruger 10/22 rifles new out of the box. Both had the case flip 180 degrees in the breech and jam the open case head into the extractor. Both were pulled off by hand.

hemiram
December 25, 2008, 08:12 PM
My Iver Johnson .22 PPK clone did this a lot, and I kept it surgically clean. I never did get it working right, so off it went as a trade in.

NC-Mike
December 25, 2008, 10:30 PM
What I find interesting is someone referring to a Browning High Power as a POS....never heard that before....his BHP evidently needs some proper maintenance....

+1 on that. I have a FEG, BHP-clone and love it. Hasn't even hic-cupped yet either.

notorious
December 26, 2008, 01:15 AM
Never thought of any Browning as POS guns. They are very well made and their O/U shotguns are tops!

Vonderek
December 26, 2008, 11:10 AM
In post #7 it is revealed that the owner of the pistol never cleans it. Irresponsible maintenance will gum up any machine. It's like never changing the oil in a car and then complaining that the car is a POS when the engine fails.

Rxxdoc
December 26, 2008, 11:33 AM
He needs to buy a glock. They are very reliable even if they are not clean. (except for the occasional KB). LOL.

notorious
December 26, 2008, 03:43 PM
Unfortunately, the luster on the Glock has worn off when we saw failures on a consistent basis on a batch of G21s on the line. It is common enough that the armorer here is already well versed in fixing or spot check common problems of the G21.

wally
December 26, 2008, 04:14 PM
Almost certainly a magazine problem. See if it also ejects loaded rounds on the ground with the empties.

Dirt/fouling in the magazine body can cause the spring to bind and the loose rounds on top do god knows what under recoil, especially if the recoil then unbinds the spring.

--wally.

notorious
December 26, 2008, 04:35 PM
Yep, some ammo like Wolf really gunk up the magazine. I had to wash out 8 mags like that when the rounds stopped feeding and the mag follower stopped 1/2 way in the mag body.

the foot
December 26, 2008, 07:18 PM
Buy the POS Browning from your roommate for the best price you can get. Then thoroughly clean the weapon. The extractor is probably all gunked up, and the magazines need to be taken apart and cleaned.

And then more than likely you will have a fine firearm that is definitely not a POS.

notorious
December 27, 2008, 12:56 AM
I'll give him $100 for his POS and he pays the shipping for me doing him the favor.

icebones
December 27, 2008, 04:07 PM
shure it isnt a illegal browning copy made in kajikistan by some guy on a 120 year old mill and lathe?

any m35 i have ever shot was a smooth operator. something smells bad here and its not the 6 day old pizza under my bed... lemme ask you? does he never change the oil in his car too? this is just too sad...

cuervo
December 27, 2008, 04:34 PM
How old is it? It could use a new barrel.

I had one that would jam repeatedly because the case would stick in the chamber. Replacing the barrel fixed it easily.

aomagrat
December 27, 2008, 05:28 PM
I had a Ruger P345 that would stovepipe live rounds.

notorious
December 27, 2008, 05:35 PM
I had a Ruger P345 that would stovepipe live rounds.


That is a standard feature on Ruger auto pistols, no?

LIQUID SNAKE
December 28, 2008, 05:01 AM
I don't think Mike's GP35 ever worked, even when it was clean. He says he got in new in Kalifonia because his dad had one. His pop has the one with the tangent site and the wood holster that attaches as a butt stock. Mike's has the tangent sight but no facility to mount the stock. Also he says he already had a Glock once but, it got stolen in ********** along with his .44 magnum. I guess a lot of guns get stolen in that country.

notorious
December 28, 2008, 05:31 AM
I can attest to that. I had 3 guns stolen in the People's Republic of Kalifornistan. Never got any of them back. Found out one was recovered and destroyed without me ever being notified.

If you enjoyed reading about "interesting jam." here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!