New Gun Pics!


PDA






coloradokevin
February 12, 2009, 11:27 PM
So, I finally picked up my new S&W MP15T today! Thought I'd share some pictures with my friends here at THR, since I always love having a new toy around the house :)

I've equipped the new gun with an Eotech 512, which I also just purchased:
http://i126.photobucket.com/albums/p85/coloradocop/SWMP15T.jpg

http://i126.photobucket.com/albums/p85/coloradocop/SWMP15T1.jpg


Here's my lovely roommate, Amber (Darkhorse84), who agreed to help "model" the gun for me. She's normally not this tacticool, but was still wearing BDU's from her police academy when I took these photos:

http://i126.photobucket.com/albums/p85/coloradocop/SWMP15T2.jpg


http://i126.photobucket.com/albums/p85/coloradocop/SWMP15T3.jpg






The only concern I have with the gun so far is that the sights are not set to center. I'm not sure if the weapon was factory zeroed or not... If it was, I'm concerned about why the rear sight is so far left of center. If it wasn't factory zeroed, then it isn't a big deal. This is a picture of the Troy folding rear sight, set as I received it from Smith and Wesson:

http://i126.photobucket.com/albums/p85/coloradocop/SWMP15T4.jpg


Anyone know if these rifles are factory zeroed, and if so, why this sight would be so far left-of-center for an initial zeroing?


Otherwise, it feels like a fine gun, and I can't wait to give a range report in a few days!

If you enjoyed reading about "New Gun Pics!" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
lionking
February 12, 2009, 11:31 PM
what gun?:cool:

dirt_j00
February 12, 2009, 11:53 PM
Congrats!

I pickup my M&P15A on Sat. and can't wait to take it to the range. Be sure to post a range report after you go too.

I'll stay tuned to find out about the rear sight issue...

Geneseo1911
February 12, 2009, 11:56 PM
sexy.
Oh yeah; nice rifle, too!:p

No idea if S&W zero's them at the factory, but I would hope if it was that far off, they would fix it rather than shipping it that way. I recently bought a Colt which, when I zeroed it, was farther out of whack than that. The general consensus around here was that the barrel was canted, and to fix it would require filing and peening the notch in the upper to rotate the barrel slightly. I know the rifle was test fired (brass marks on the shell deflector), but they apparently were only function testing it, not actually aiming. AR15.com has a very good building section if you don't know how the barrel and upper mate. If you know how they go together, you can see how easy it would be for a tiny offset to throw the sights out of alignment.

My guess would be if they zeroed it and it was that far off, it wouldn't have made it out of the factory. Don't lose any sleep over it. Maybe you should shoot it....:D

Let us know what you figure out!

Edit: What is it about a picture of a woman holding a gun? Especially an EBR...

husker
February 13, 2009, 12:11 AM
good lookin gun better lookin room mate

coloradokevin
February 13, 2009, 01:50 AM
My guess would be if they zeroed it and it was that far off, it wouldn't have made it out of the factory. Don't lose any sleep over it. Maybe you should shoot it....

Yeah, I was hoping the same thing. I have a quarterly qualification tomorrow, and will hopefully get this gun cleaned up and ready to go by then. I'd like to find out if there are any issues that I need to deal with!

Eightball
February 13, 2009, 02:37 AM
I don't see a gun in the 3rd and 4th pictures............:D

franconialocal
February 13, 2009, 03:22 AM
Yeah....I was going to say "Sexy....and the rifle is nice too"....but someone beat me to it!!

Tell your roomate good luck at the Academy!:D

Kind of Blued
February 13, 2009, 03:24 AM
SLICK!

A quality, handy AR carbine is a necessary accompaniment to the 20" rifle. The EOTech was a good choise as well. I need to get one myself.

We should go make some noise in the mountains again sometime, and you should definitely bring the new one.

coloradokevin
February 13, 2009, 03:45 AM
SLICK!

A quality, handy AR carbine is a necessary accompaniment to the 20" rifle. The EOTech was a good choise as well. I need to get one myself.

We should go make some noise in the mountains again sometime, and you should definitely bring the new one.

Almost didn't recognize you with the new screen name! We definitely need to get out and throw some lead around again sometime!

I'm also looking to add on one of those grip-pod vertical foregrips, like you had on your rifle.... seems like a nice accessory for such a pretty new toy :)

Kind of Blued
February 13, 2009, 03:56 AM
I'm also looking to add on one of those grip-pod vertical foregrips, like you had on your rifle.... seems like a nice accessory for such a pretty new toy

If it's a toy, go for it. I think Command Arms makes a copy, and VersaPod makes an original-ish one. If you're going to use it on duty... that's a different story...

I killed mine. It's between here and Boulder in the landfill. :)

skidooman603
February 13, 2009, 06:01 AM
God I Love a Woman with an AR :p Nice new toy brother! Like the 512?

usmc1371
February 13, 2009, 07:52 AM
Good call going with the custom gun rack for your new custom gun.

possum
February 13, 2009, 08:59 AM
congrats, on the rifle. thanks for sharing.

yosarian
February 13, 2009, 11:58 AM
Nice rifle and let us knoow how she shoots.

Robert
February 13, 2009, 12:03 PM
Wait there was a gun in those pics... mmmmm must have missed it.

Nice M&P, hope it works out well for you.

amwdc
February 13, 2009, 07:33 PM
wow ,nice rom.... gun

coloradokevin
February 14, 2009, 05:09 PM
So, I took the new gun out to the range yesterday for sighting. I worked on this at the range where my department conducts quarterly qualifications, and only had 50 yards and a bad-guy-shaped target to work with...

Nevertheless, the rifle performed well, cycling it's first 250 rounds without a hitch. I was shooting from an unsupported prone position, without a sling, at 50 yards, in gusting wind conditions with light snow flurries.

My better of the 3-5 shot groups could be covered by a quarter, and I was quite happy with the initial accuracy that this gun displayed.

It was hard to get a real feel for it though, as I was freezing my butt off out there, and not shooting from a supported position. As a result, several groups were quite a bit wider, though they all remained within the target's head, and mostly within the ocular cavity. I'd attribute any loss of accuracy to the trigger-puller, rather than the weapon itself. Still, shivering and shooting don't seem to go so well together, so I called it an early day.

possum
February 14, 2009, 10:26 PM
sounds good, thanks for sharing, and please continue to keep us updated later down the road.

darkhorse84
February 14, 2009, 10:31 PM
Kevin, don't downplay it. Yes, there's always room for improvement, but I'd take that 100% accuracy you got and run with it. I'm very proud of you! (And your new toy!) ;)

natescout
February 14, 2009, 10:38 PM
congrats on your new AR, now a range report

coloradokevin
February 15, 2009, 06:26 AM
Quick afterthought:

I meant to mention this earlier, but completely forgot to say something about it... When I disassembled the rifle for an initial cleaning prior to my range trip, I took note of a couple of items:

1) The extractor spring is surrounded by an o-ring type of item. I've personally never seen this before, but my quick search online seemed to indicate that this is some sort of new/upgraded extractor? Again, my rifle is factory new, so this is how it shipped from S&W.

2) The bolt itself is marked with an "MP". I've heard different rumors on this... Some folks claim that it is the abbreviation that is used to indicate if the bolt was magnetic particle tested, while others simply feel that it is in reference to the fact that the rifle is an "M&P 15". Honestly, I don't know the truth on this matter, but thought I'd share that information in case anyone else wanted to know about it.

3) When I range tested the rifle I started by sighting in the iron sights. I was initially concerned about the degree to which the rear sight had been factory set to the far left of center (see above pictures). In establishing a 50-yard zero for this rifle I ended up having to move the sight back towards the center about 20 clicks or so (don't recall the exact number now). It is still left of center a bit, but not nearly as much. I'll post more pictures when I have some time.



congrats on your new AR, now a range report

Nate, I'll certainly keep you guys updated as I have more time to work with this rifle. I haven't done much with it yet, but there is a brief range report just a few posts ahead of yours (post #18).


Kevin, don't downplay it. Yes, there's always room for improvement, but I'd take that 100% accuracy you got and run with it. I'm very proud of you! (And your new toy!)

Amber,

Welcome to the forum; judging by this thread, I'd say you were popular before you ever arrived! I'm glad my thread finally dragged you out of hiding and got you posting... I guess I'll just have to pose you with my firearms more often, eh?

darkhorse84
February 15, 2009, 03:59 PM
Maybe I'll just stick to shooting. :)

RockyMtnTactical
February 15, 2009, 04:28 PM
Very nice!! :)

ohiobowhunter78
February 15, 2009, 10:38 PM
Nice gun... I am excited to start customizing my new RRA this weekedn at our local gun show.

If you enjoyed reading about "New Gun Pics!" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!