Scope ring base.


PDA






tpaw
March 1, 2009, 09:20 PM
Just bought a Savage Tactical 10FP in .308. Can anyone recommend a good quality scope ring base and scope rings for my Nikon. Thanks.

If you enjoyed reading about "Scope ring base." here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
SciFiJim
March 1, 2009, 11:35 PM
Cheaper than Dirt has a scope mount wizard (http://www.cheaperthandirt.com/ScopeMountSearchWizard.aspx).

coyotewillie
March 2, 2009, 06:24 AM
As far as rings go, I think one of the best deals is Burris Signature rings. The plastic inserts guarantee perfect, no hassle alignment. Also, no worries about ring marks on the scope if you ever change setups. Greg

BlacklabelOP
March 2, 2009, 06:56 AM
I have been dealing with the same thing the last few days.. settled on this set-up
Base

http://egw-guns.com/store/index.php?main_page=product_info&products_id=179

rings

http://www.opticsplanet.net/burris-xtreme-tactical-1-two-rings.html

for my 1 inch busnell 3200 elite on my new 10fp .308

madcratebuilder
March 2, 2009, 07:50 AM
Burris etreme tactical rings are the best non quick release I have used.

Art Eatman
March 2, 2009, 11:17 AM
Burris, Leupold, Weaver, Conetrol...They all work. Just my opinion, but I think the Conetrols are the most aesthetically pleasing. I have a set on my Sako, and they've done just fine for some 35 years. :) I've mostly used Weavers, and haven't ever had a problem.

USSR
March 2, 2009, 12:03 PM
Ken Farrell sells alot of 20MOA picatinny bases and tactical rings for Savage rifles.

Don

tpaw
March 3, 2009, 09:38 AM
Question? Does the one piece rail interfere with loading and unloading, or, cartridge extraction?

sohcgt2
March 3, 2009, 10:17 AM
Leupold make a single piece base for right handed rifles, whereas most bases you will find are 2 piece. The 1 piece base makes it easier to align the rings which is a must to avoid damaging the scope.

EJSG19
March 5, 2009, 09:59 AM
I'm in a very similar position right now. Picking up my Savage 12 VLP tonight.

What rings would you guys recommend for a Nikon Monarch with a 50mm objective bell? Have my eyes on the 6-24x50, looking for a 400 yard gun or so.

Burris, Warne, Leupold are all on my list. Not sure what height it will take to just clear that scope and not be too high.

USSR
March 5, 2009, 11:00 AM
Question? Does the one piece rail interfere with loading and unloading, or, cartridge extraction?

Not at all. Also, the one-piece rail is stronger and allows for more mounting positions for correct positioning for eye relief.

Don

mcwjr13
March 5, 2009, 03:08 PM
Thanks for the link Blacklabelop I haven't seen that one before.

tpaw
March 5, 2009, 09:36 PM
EJSG19

Here's what I ordered for my Savage 10FP with a 50mm scope. Click on the link below, then click on each item to see what it looks like.

https://www.swfa.com/ShoppingCart.aspx?add=true&ReturnURL=showcategory.aspx

Sorry, link did not work.
Here's what I got from SWFA.....http://www.swfa.com/

Warne base.....Part number M666M

Scope rings.....3/4 inch rings.....Part number 420182. Hope this helps.

If you enjoyed reading about "Scope ring base." here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!