My first homemade knife!


PDA






BhmBill
April 2, 2009, 01:48 AM
On Monday my dad called and needed help cleanin up around the house to get ready for a part this weekend for my brother who's bein shipped to Afaghanistan later this month. After cleaning for awhile, I accidentally found an old rusty file and a lil piece of steel that was hollow and I figured with very minor grinding the file could slip into the steel and make a nice knife with some wor. I grinded the file slightly and used a 15 ton press to press it into the handle, after a lil cutting, shaping, and sharpening, I ended up with what you see in the 1st picture, about 45 mins of work invested at that point.

http://img5.imageshack.us/img5/3598/0401092133a.jpg


I asked my mom for some help (im only 20, so I asked her for help alot, lol) with making a handle and scabbard/sheath/holster. She brought me a bag of shoe strings and I grabbed some orange and black shoe strings and thought i'd use them to make a cord handle. I found an old leather belt that I had outgrown and my mom suggested it'd work to make a "scabbard". She gave me some heavy duty thread and some upholstery needles and I headed home. I cut the belt up and came up with a little belt holster for the knife and I started sewing it with the thick thread. It took about 45 - 60 mins to finish it. After finishing the holster I immediately started trying to figure out how to use the orange shoe string to make a cord handle. After about 5 mins of tinkering I came up with an idea based on how nooses work (something I learned accidentally while a freshmen in highschool). Another 10 mins and I had it wrapped nice and tight.

The knife with the shoe string cord handle.

http://img16.imageshack.us/img16/6874/0401092200.jpg

The knife in its leather belt holster.

http://img3.imageshack.us/img3/4705/0401092201.jpg
http://img8.imageshack.us/img8/9819/0401092201a.jpg


So about 2 hours of work invested into a bunch of old stuff I had lying around the parents house. Tools used were a 4.5" grinder (cutting, grinding, and sanding discs were used), a bench grinder, and a 15 ton press. Materials used in the knife were an old file (pre-tempered) to form the blade, lil piece of galvanized steel for the handle, shoe string to cord wrap the handle (lighter was used to melt string ends), an old belt and thread & needle to make the holster. Time to whetstone it even though it's rather sharp from the 120 grit sanding disc.

thank you to 7x57chillmau, Todd A, and HSO for pictures and info about cord handles!

sorry for the crappy pics, all I have to use is my camera phone. And the knife isn't that small, I just have big ol' hands.

I hope you guys like. It was my first knife and ALOT of fun, way easier than I thought it'd be!

If you enjoyed reading about "My first homemade knife!" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
bikerdoc
April 2, 2009, 07:52 AM
Good job!

Now that you have been bitten by the blade bug you will become like the rest of us knife nuts.

sakimoto
April 2, 2009, 07:55 AM
Nice knife! I like the shape and profile. Good job!
Saki:D

BhmBill
April 2, 2009, 12:16 PM
Thank you guys! I'll see about making another one this weekend. Theres plenty of files and pieces of very good steel from years of us hot rodding that would be perfect for a knife.

BhmBill
April 2, 2009, 12:53 PM
Also, I wore the knife today for the first time. I didn't think it'd be this comfortable or conceal this well, it's like im not even carrying it. The holster fits so well. the bottom of it slips into this "utility pocket" in my pants pocket (its like a small pocket within the pocket) so my regular pocket space isn't compromised at all (like with some clip on knives), but even when it's not in the utility pocket, It doesn't even stick out below the bottom of my shirt anywhere.

BhmBill
April 2, 2009, 05:32 PM
I decided to use some of the black string and wrap the holster to cover up the stitching. It tightened up the holster a lot. The knife and holster look alot better in person. Again, sorry for the crappy pictures, all I have is my camera phone.

http://img4.imageshack.us/img4/1648/0402091409.jpg

Macmac
April 2, 2009, 08:37 PM
Well you have the eye part down good right now.

When it needs sharpening see if a file will work or not.

If the file cuts the blade is maybe about right, and if the file skates the blade is a bit hard.

Did you quench often in water to keep the file steel hard, or just get it blue heated pretty much. I can see a blue glint.

And I understand what your camera is.. LOL Mac

BhmBill
April 2, 2009, 09:30 PM
Idk, I rubbed the file I used for the blade against all the other files i had before I made it and this one got distorted/scratched/scarred the least, plus it was the perfect size and the proper shape. I haven't tempered, annealed, or anything yet to the blade. Right now, it's pretty damn hard and holds it's edge very well. I gave it a nice utility style bevel. I currently don't have another file handy to see if it'll skate or cut. The knife is only a few days old, so I haven't quenched it yet, lol

If you enjoyed reading about "My first homemade knife!" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!