[Jagman1]

FNG here Guys, My name is Rob - aka - Jagman, member of a few gun forums for years, and when I have been reseaching my problems 'The Highroad' kept showing up in my searches, usually with great answers and good results, so I figured I would go to the source with this, my current problem!
I hope you dont mind me jumping right in with questions, but here it is:

When I pulled the trigger pack out of this savage 69 xlr series E - lots of bits went flying, I do not know where this goes, and I have only ever once dismantled a pump action shotty before.
I have tried to find a schematic online but came up short - but found one pretty close.
if you are familiar with these, I think Stevens and some Remy's with fixed barrels are the same.
You have to remove the stock and trigger group to remove the bolt from the rear.
Any help will be more than welcome.
Jagman

More pics. here:
http://public.fotki.com/Jagman/savage-69-pump/savagepump022.html

Explded view, not the exact rifle but looks very close.
http://www.gunuts.com/images/77.jpg


http://images109.fotki.com/v795/photos/2/139782/7540357/Savagepump022-vi.jpg

[jlv08]

There is a web site that has schematics for your shotgun and would be an excellent reference for you to see how the trigger group parts are configured.

Numrich gunparts corporation has an online site that has those schematics and you should be able to figure out how to get your shotgun up and running.

You may have to pay about a dollar for the schematic or it might be free.

Hope this helps.:)