[JTW Jr.]

Just a few I finished up recently , the tan G10 one I made for myself , about time I started carrying one of my own. :D

First model I have named also , EDFU ( you choose Every Day Fixed Utility ) or Every Day Friggin User....:p

Specs on all the EDFU's are pretty close , I don't make patterns so each one is a slight bit different from the others ( never could color inside the lines in school either ).

These were all made from D2 , Paul Bos Heat Treat .

Steel: .152 thick D2 with Paul Bos Heat Treat
Average OAL: 6 5/8"
Blade: 2.75" to 3" ( I try to keep it just under 3" )
Finish: 400 grit hand finish on the blades and 320 grit on the scales ( to provide plenty of grip ).

First one is my daily user , scales are only sanded to 220 grit , I like em to stay grippy when wet. Made this last month to take on my vacation to Pittsburgh.

http://i262.photobucket.com/albums/ii89/VegasHenchman/MyKnives/Edfu_20090604_0850.jpg

http://i262.photobucket.com/albums/ii89/VegasHenchman/MyKnives/Edfu_20090604_0851.jpg

Shown here with a couple others I been carrying lately.
http://i262.photobucket.com/albums/ii89/VegasHenchman/trade/tradEDU.jpg

[JTW Jr.]

I make the kydex setup for tec-lok's ( which I dont have any of ) or carry static carry in the pocket with paracord. Either way works well.

http://i262.photobucket.com/albums/ii89/VegasHenchman/MyKnives/EDFUSheath.jpg

This one is in green micarta.

http://i262.photobucket.com/albums/ii89/VegasHenchman/MyKnives/EDFU.jpg

http://i262.photobucket.com/albums/ii89/VegasHenchman/MyKnives/EDFUSheath.jpg

this one , close to the one above , but has red liners under the green micarta.

http://i262.photobucket.com/albums/ii89/VegasHenchman/MyKnives/EFDUGreen.jpg

http://i262.photobucket.com/albums/ii89/VegasHenchman/MyKnives/EDFUGreenwithredliners.jpg

[Valkman]

Nice, and EDFU you too! Have a great 4th! :D

[hso]

That's a handy looking little critter! Pretty too.

Nice job, John.

[JTW Jr.]

Thanks... I am hoping to do a run of these in 1095 soon , as well as in ATS-34.