[irishbeener]

Can't find skematics in regards to the " break-down " of this firearm. Can anyone shed any light on where I could find this information ? Need instructions on the removal of the slide from the frame it is jammed and not sure exactly why ?

[rcmodel]

http://www.coltautos.com/

rc

[Ron James]

:) However, if your slide is jammed on to the frame, you have a bit of a problem. The slide has to move back about an inch or so to turn the barrel out of the locking grooves

[Jim K]

I STRONGLY advise against any disassembly beyond removal of the slide and barrel (and possibly grips) for cleaning. If you choose to ignore this advise and go merrily driving out pins, please don't do a post asking how to get the damned thing back together. (If you do, I will do what GreasyStool threatens for use of pliers.)

Jim

[Ron James]

I made the mistake Jim is talking about once. Siting at a kitchen table over a towel, early evening, every thing came apart very easily, It was two O'clock in the morning before I got that da** grip back to together.

[Comanche180]

To reiterate, do not dissassemble this pistol unless you have a lot of time and patience necessary for the reassembly. Don't ask me how I know this.