Ramshot Powder?


PDA






Mags
July 20, 2009, 07:22 PM
What's the deal with Ramshot powder I use Tac for 223 and Shilouette for 9mm and 45 ACP. The only data on Ramshot I can find is in the Ramshot handouts. Why is Ramshot data not in any manual such as Lee or Hornady?

If you enjoyed reading about "Ramshot Powder?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
NCsmitty
July 20, 2009, 08:21 PM
I'm not sure why, but they do have an online load guide. Are you aware of that? Download and print it out.
Email them and ask about a manual.

http://www.ramshot.com/powders/


NCsmitty

45ACPUSER
July 20, 2009, 08:57 PM
You need to get more manuals.

Mags
July 20, 2009, 09:20 PM
I'm not sure why, but they do have an online load guide. Are you aware of that?
Thanks NCSmitty, but that is the same manual as the Gun Store Handout.
You need to get more manuals.
45ACPUSER, you happen to know of any manuals posting data for Ramshot powder?

rbernie
July 20, 2009, 09:30 PM
Lyman #49 has limited Ramshot load data in it.

NCsmitty
July 20, 2009, 09:31 PM
Here's a link to reloadersnest site.

Look up your cartridges and see if Ramshot is listed for each.

http://www.reloadersnest.com/


NCsmitty

Joemyxplyx
July 20, 2009, 10:20 PM
Steve's Reloading Pages has tested loads for many cartridges. There is Ramshot loading for most cartridges. Most of the loads I checked have the same loading ranges as the online Ramshot loading PDF.

Here's the link: http://stevespages.com/page8c.htm

Ky Larry
July 20, 2009, 10:30 PM
Sierra has load data for RamShot powders.

Mags
July 20, 2009, 10:32 PM
Thanks everyone for the info

NorCalRanches
July 20, 2009, 10:40 PM
I don't know what version it is (its in the other shop) but the latest Hornady version has some Ramshot data. I swear it is only mentioned once or twice, but I have at least seen it in .223.

Rokman
July 25, 2009, 12:35 PM
I have info for Tac in my Sierra, Nosler and Barnes manuals. I love to use Tac in my .223 and have used it for 6.8spc with good results. Have bought x-terminator powder for .223, but have not used it yet.

If you enjoyed reading about "Ramshot Powder?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!