Devcon products


PDA






muffo
September 1, 2009, 01:54 AM
where would i go to find devcon products. baring in mind im in Australia

If you enjoyed reading about "Devcon products" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
muffo
September 1, 2009, 02:01 AM
Oh and also where would i go to get a release agent

mp510
September 1, 2009, 02:18 AM
Local hardware store.

muffo
September 1, 2009, 04:14 AM
I went to all the local hardware places but no luck

berettashotgun
September 1, 2009, 06:04 PM
The stuff is very similar to "HYSOL" brand 934BA or 917BA or "REN" 2 part paste. (or "J-B Weld".:cool:)
Your friendly local airport or aircraft annual shop will be a ready source.
I personally prefer HYSOL brand 934 BA ( part "A" and part "B") I don't know why it is called "BA" at the end of the part number. It will replace DEVCON or REN for most potting applications; with a plus - it flows excellent with a heat gun.
I do know it (DEVCON) works well on USAF planes on leading edges, I just almost REFUSE to use it - I prefer actual sheetmetal repairs to aerospace "bondo"

Simple paste wax applied to any surface you don't want it to stick to, or some teflon spray as a mold release.

tango2echo
September 1, 2009, 08:43 PM
Kiwi shoe polish in "neutral" is the best release agent. Devcon 10110 can be ordered online and shipped if not available local.

t2e

muffo
September 3, 2009, 02:17 AM
would Metal mend be the same. http://www.autobarn.com.au/products/6/37/4214222/

muffo
September 3, 2009, 11:29 PM
bump

berettashotgun
September 4, 2009, 05:19 AM
For bedding a barrel - I'd say yes.

If you enjoyed reading about "Devcon products" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!