british lancer pistol at 25m


PDA






flibuste
September 5, 2009, 10:20 AM
First shooting with this Indian replica (from TOW), smooth bore .

Loading with 40gr BP, 25gr cornmeal and patched 650 ball .

Recoil is stout but comfortable, aiming (without sights !) 1meter under the target :

All bullets did not touch the paper this time but it seems promising........... next step is adding some front and rear sights .

http://www.thehighroad.org/attachment.php?attachmentid=104824&stc=1&d=1252160407

Here is the authentic one :

http://www.goantiques.com/detail,victorian-pistol,2070238.html

Regards

If you enjoyed reading about "british lancer pistol at 25m" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
arcticap
September 5, 2009, 12:55 PM
You always shoot very accurate targets. :)

I have the same pistol that I fired with shot and .22 bullets, but not round balls.

http://www.thehighroad.org/showthread.php?t=363003

http://i55.photobucket.com/albums/g159/arcticap/Sea%20Service%20Pistol/untitledaa.jpg

flibuste
September 5, 2009, 01:10 PM
Very pleasant video !

This pistol seems to have many different names : Tower horse pistol / lancer's pistol / pattern or service pistol / etc...

There is also a 577 rifled bore version.

Anybody knows more about the history of this pistol ?

thanks

Das Jaeger
September 5, 2009, 02:30 PM
Holy crap , your a ROCKER ! :D ..Right on .
Ummm , nice Proof Test Load you had going on that video , awsome . :D
A Rocker and CRAZY !

Very Cool Video , thanks , I was chucklin the whole time :D

Das Jaeger :evil:

Ginormous
September 5, 2009, 03:22 PM
Haha, absolutely NOT how I expected an arcticap video production to be scored. Barry Manilow maybe, but not THAT! :D

Genuinely gunny stuff.

flibuste
September 12, 2009, 11:54 AM
Some more test :

I have tried this load : 40gr BP, 60gr cornmeal, wet patched ball 0.650.

What makes a big difference is the "wetting" of the patch : when very wet , the ball goes down with no hammer stroke but if only slightly wet a stroke or 2 of the hammer is necessary : all that has some impact on accuracy.

- When the barrel is 100% clean, i.e. the first shots at the range, there is a lot of vent and hence no compression : recoil is very weak and hit is very low.
- After 2 or 3 shots, fouling gives more compression and recoil is getting stronger and stronger. If patch is getting dry recoil is increasing and it hits higher.

I have dovetailed a rear sight and glued a front sight : now I can aim easily

The first 4 shot demonstrated that I was hitting left so the subsequent 14 shots were adapted : see the 2 different aiming spots( visée) :

First good point : 100% of the shots hitted the paper !!!!

The difficulty is about the regular wetting of the patch among other and some more testing will be necessary........

http://www.thehighroad.org/attachment.php?attachmentid=105223&stc=1&d=1252770809

http://www.thehighroad.org/attachment.php?attachmentid=105224&stc=1&d=1252770865



Regards

Ginormous
September 12, 2009, 12:04 PM
flibuste,

You always do very concise and well documented range reports and results with some very interesting pistols. I always look forward to your posts. Keep it up!

Edit: BTW, your sights are really nicely done!

flibuste
July 29, 2013, 01:35 AM
The same pistol : 6 shot at 25 meters ; I did not dare shooting the 7th ball because the clustering was so good !!!!

Quite impressive when you remember that these pistols were supposed to shoot "a brule pourpoint" ( means so close that it will fire the cloth of the foe !!!)



http://i42.servimg.com/u/f42/11/02/14/58/004_210.jpg






And another similar from another Indian manufacturer :



shooting duelist at 25m (smoothbore pistol as the other one but bore slightly smaller)

load: 2.3g BP,cornmeal and patched cal.60 ball

After the point of aim was established, all impact are within the drawing.


http://i42.servimg.com/u/f42/11/02/14/58/00111.jpg


regards

If you enjoyed reading about "british lancer pistol at 25m" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!