.223 Load


PDA






giggitygiggity
September 6, 2009, 10:23 PM
Does anyone use IMR SR 4759 powder to reload .223Rem? I want to use it for reloading 55gr FMJ bullets. Does anyone know about how much powder I will use per round? Is this a good powder to use for .223? Thanks.

If you enjoyed reading about ".223 Load" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
steve4102
September 6, 2009, 10:33 PM
No, I do not think it is a good powder for the 223. If it was it would be listed in several manuals. This is a fast powder and if you are loading it in an AR or similar semi-auto it may not cycle the action.

If you must have data I found this for you.
http://stevespages.com/224_8_55.html

giggitygiggity
September 6, 2009, 10:40 PM
How about IMR 4227 for use in a .223 AR15? Thanks.

steve4102
September 6, 2009, 10:57 PM
Why such fast powders for your AR? There is a whole host of excellent powders in the proper burn range for the 223 AR. Powders like 335, Tac, 2230, Varget, X-T, 748 etc. etc.

NCsmitty
September 6, 2009, 10:58 PM
As steve4102 mentioned, the two powders that you mentioned are really too fast burning to be considered for use in an AR with 55 FMJ. They can be used with lighter bullets but they build pressure rather quickly with their burn rate.
There are much better powders to use in the application that you mention.
Check your load manuals for good powders or look at www.hodgdon.com, www.ramshot.com or www.accuratearms.com/.


NCsmitty

giggitygiggity
September 6, 2009, 11:07 PM
Alright, I found a load that uses Ramshot Xterminator powder from Ramshot's website. Will a loading with this powder be suitable for use in an AR15? Thanks.

Walkalong
September 6, 2009, 11:11 PM
Yes, it will work, although Tac may be a better choice.

loadedround
September 7, 2009, 09:21 AM
SR4759 is a powder normally used for reduced loads in rifle cartridges. This powder really has no application in the 223/5.56 cartridge; however where there is a will, there is a way and someone may come up with an application for it.

steve4102
September 7, 2009, 09:40 AM
Yes X-T will work. I use it as well as other Western ball powders like Tac, 2230 and 2520. What manuals to you have on hand? They should have quite a list of excellent 223 powders.

If you enjoyed reading about ".223 Load" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!