Reload Help Question


PDA






TRguy
September 9, 2009, 07:36 PM
Need a good load powder weight

9mm
I have CCI SP 300
Clays Powder
Hornady XTP JHP 124gr

How much powder. Was thinking 3.1grs, could you go heavier?

If you enjoyed reading about "Reload Help Question" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
steve4102
September 9, 2009, 08:00 PM
Have you checked your manuals for 124gr bullet and Clays Powder?
Here is a link to Hodgdon's data.
http://data.hodgdon.com/cartridge_load.asp

oneounceload
September 9, 2009, 08:24 PM
Was thinking 3.1grs, could you go heavier?

If you don't have a manual to check your data, then you're NOT thinking....get a load manual!:banghead:

TRguy
September 9, 2009, 09:01 PM
I have several manuals, Just asking if someone has worked with Clays and my bullet and had some positive result with different gr loads given my projectile design and weight.

MMCSRET
September 9, 2009, 10:55 PM
please review your primers! You stated CCI 300 ; these are not small pistol primers!!!!
Please be careful!!!!

TRguy
September 9, 2009, 11:13 PM
I looked at the wrong tray, they are CCI 500 SP, The 300 are my LP for the 45, thanks for catching that.

If you enjoyed reading about "Reload Help Question" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!