[cptkeybrd]

How can I size without lubing, can I do it with wd 40 or something. I want to heat treat. I am using the Lee sizer. Thanks

[454PB]

Sure, it takes very little lubricant, some people use soapy water.

[bullseye308]

I size all mine first then lube them with Lee push-through sizers. No problems.

[Remo-99]

How can I size without lubing, can I do it with wd 40 or something.

If you use a water soluble lube for example, you can rinse and dry after sizing, before heat treating and final lubing.

WD40 will leave a residue, that may or may not degrade the powder of the final loaded round. Just a thought.

[cptkeybrd]

Can u recomend a water compatable lube?

[psyop]

Liquid dish soap, like Dawn

Just a little goes A LONG WAY

What size are they dropping?

[cptkeybrd]

Thanks Ill give it a try. I am doing 357,243,270 And want to heat treat.
Thanks all for your help

[fourdollarbill]

I never heat treated before but I just thin down the liquid alox with mineral spirits to a water consistency. Lightly tumble lube and you can start sizing them in 20 minutes. It takes about 5 small drops of this mix for 200 bullets or so. When you pick them up they don't even look lubed but it is more than enough for sizing.