Similar bullets, similar powders?


PDA






Mose
October 29, 2009, 01:55 PM
I see recipes at Alliant that I'm interested in but they are using Speer bullets...would not the same recipe apply to the same style and weight in a Hornady?
Also: Seeing as IMR and Hodgdon are the same company, are not their versions of 4227 the same and interchangeable?
Thanks,

If you enjoyed reading about "Similar bullets, similar powders?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
rcmodel
October 29, 2009, 02:06 PM
H427 and IMR4227 used to be slightly different powders using different data.

No problem now as Hodgdon discontinued H4227 a couple years ago, or longer.

Data can be used with a different brand bullet as long as you start at a starting load and work up.
In the case of the Alliant data listed by Hodgdon now, most of the time, no starting load is shown.
Just reduce the max load shown by 10% and work up, watching for any signs of excess pressure.

You should be doing that with any powder anyway.

rc

~z
October 29, 2009, 02:08 PM
bullets of the same type and weight may be interchanged but the powders...treat them as separate regardless if the names rhyme.

Welcome aboard.
~z

Jim Watson
October 29, 2009, 02:19 PM
Differences in bullet hardness and bearing surface can have an effect on chamber pressure and maximum loads. That is the reason for all the boring fine print in the book about "starting loads" and "working up."

As I understand it, originally, H4227 was made in Australia, IMR 4227 was made in Canada; not the same stuff. But a couple of years ago, they went to labeling the Australian product as IMR and dropped the H number. Confusing, eh?
I would read the label and look in the load data.

If you enjoyed reading about "Similar bullets, similar powders?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!