35 whelen load data


PDA






mhat
October 30, 2009, 07:45 PM
just got a single shot 35 whelen,has anybody got any good load data for it ? i'll be using a 200 grain remington psp (thats the only one i could find localy). thanks for any help.

If you enjoyed reading about "35 whelen load data" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
SlamFire1
October 30, 2009, 09:01 PM
I have been having fits with my 35 Whelen till this month. I have had bad hangfires with AA2520, lesser hangfires with Varget. No hangfires with IMR 3031, but I am out of that.

I find it hard to believe but this cartridge likes fast powders. IMR 3031 is a good first choice.

This month’s testing I had no hangfires with IMR 4064. My best test data is below. I got a 1 3/8” five shot 100 yard group with the best load. Other groups were basketball sized.

My greatest problem with this cartridge is shooting this lightweight rifle without flinching. It kicks and is uncomfortable to shoot.



http://img.photobucket.com/albums/v479/SlamFire/M1903/35WhelenM1903fulllength263kb.jpg


M1903 1:10 twist 24" Douglas barrel

225 Sierra SPBT 52.5 grs IMR 4064 wtd Lot 2449 CCI 200 OAL 3.30
necked up R-P 30-06

16 Oct 2009 T = 65 °F

Ave Vel = 2260
Std Dev = 34
ES = 113
High = 2331
Low = 2218
N = 10

nice rounded primers, smoked case necks, most accurate load
no hangfires!


225 Sierra SPBT 53.0 grs IMR 4064 wtd Lot 2449 CCI 200 OAL 3.30
necked up R-P 30-06

16 Oct 2009 T = 65 °F

Ave Vel = 2270
Std Dev = 24
ES = 56
High = 2290
Low = 2234
N = 6

nice rounded primers, smoked case necks, no hangfires

loadedround
October 31, 2009, 08:48 AM
Mhat: We may be shooting the same type rifle. I 've had a unused Ruger 1B in 30-06 rebarreled to the 35 Whelan and have been shooting a Sierra 200 gr RN bullet in it using both H335 and Varget with the Varget having a slight edge on accuracy. Both loads are at maximum since my barrel has a long leade. I load from the Speer #14 manual if you would like to check out my loads. Both powders give me under 3/4" groups and I'm more than satisified with its proformance. :)

mhat
October 31, 2009, 06:45 PM
I've got the H&R handi rifle. Someone here in MS. had them do a custom run of 200. I'm hope I can get it to shoot for primative weapons. randy1911 sent me some load data to try also. Thanks for the info.

WYO
November 1, 2009, 07:44 PM
I can't speak for the 200 grain loads, but with the 225 grain Partitions and Barnes Triple Shocks, my go to powder is RL15. At Loadbook max loads, I get a slight bit over 2600 feet per second MV, and extreme spreads in the single digits, with good accuracy. This is with a Remington 700 Classic with a 22" barrel.

SlamFire1, put a Limbsaver recoil pad on it. The Whelen is about like a .30-06, maybe a little worse.

If you enjoyed reading about "35 whelen load data" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!