10mm Powder choices
Lone_Gunman
November 28, 2009, 09:53 PM
I am about to load a bunch of 180g FMJ 10 mm ammo. I am either going to use Blue Dot or AA#9. It looks like #9 gives the lowest pressures and the highest velocities. Is AA#9 the best choice for 10mm or am I overlooking something else?
If you enjoyed reading about "10mm Powder choices" here in TheHighRoad.org archive, you'll LOVE our community. Come join
TheHighRoad.org today for the full version!
ReloaderFred
November 29, 2009, 01:38 AM
Of the two powders you mention, the AA #9 would be my first choice. Blue Dot is a good 10mm powder, but it's temperature sensitive. The AA #9 will be more consistant.
Hope this helps.
Fred
Lone_Gunman
November 29, 2009, 07:55 AM
How does AA#7 compare to #9 for 10mm?
Winston_Smith
November 29, 2009, 08:02 AM
IMR 800x has a pretty good rep. An employee from doubletap ammo has posted a lot of information here (http://glocktalk.com/forums/forumdisplay.php?f=67).
redneck2
November 29, 2009, 08:05 AM
#9 will be easier to meter. I use Blue Dot because I got an 8# jug for $49. It's one of those things that's fun to argue about but makes little difference when it's used IMO.
ku4hx
November 29, 2009, 09:18 AM
Who knows? Some guns are finicky and just wont do well with some powders; you have to load a few test rounds of various powders and shoot in your gun. Customizing any load is part of the joy of hand crafting ammo for me.
I like Blue Dot but boy the flash and blast is impressive. AA#9 is great and meters well in my RL550B as is the case with all my powder measures.
All powders have trade-offs and you have to test in your guns to decide which serves your needs best. I found my Glock 20 with 180 gr. hard cast boolits (Lone Wolf barrel) and Blue Dot is NOT a good choice because of failures to feed. That same load in my S&W 1006 is outstanding. Go Figure.
loadedround
November 29, 2009, 11:50 AM
I have owned and have reloaded for a Colt Delta Elite since the first came out. I have found the Blue Dot to be the most consistent powder available for the 10mm. I have used AA5 and 7(AA#9 was not out then) and found them to have inconsistent pressure spikes and made me uncomfortable in using these powders for any thing more than starting loads. JMHO.
atblis
November 29, 2009, 12:05 PM
800X is the 10mm nuclear powder, but meters very poorly. It makes excellent velocity with lower pressures.
Unique works nicely for moderate 10mm loads. 1200 fps or so. I use this general purpose shooting.
Power Pistol is a very good 10mm powder. Meters well.
41 Mag
November 29, 2009, 03:04 PM
I shoot the #7 for bullets up to 165grs, and the #9 for everything over that. I like them both for what they are used for and generally get the best velocities from them over other powders in my pistol.
freakshow10mm
November 29, 2009, 03:31 PM
An employee from doubletap ammo has posted a lot of information here.
Um, Mike McNett is the owner of Double Tap, not just an employee.
Anyway, #9, Longshot, and WSF are the three best powders for 10mm. WSF is good for medium heavy practice loads and lead. #9 and Longshot are great powders for standard velocity loads. Longshot is reformulated HS7.
Winston_Smith
November 29, 2009, 07:30 PM
Mike McNett is the owner of Double Tap, not just an employee
I did not know that. It is pretty nice for an owner of an ammunition company to share so much data for free.
Same for you:)
freakshow10mm
November 29, 2009, 08:31 PM
Mike is good people.
steve4102
November 30, 2009, 12:45 AM
Mike is good people.
As are you Mr Freak. How's that for grammar? Thanks for sharing your loading knowledge.
freakshow10mm
November 30, 2009, 01:39 AM
english ain't wutt it yusta was;
JuryRig
November 30, 2009, 02:31 PM
Unique, Longshot and 800-X.
If you enjoyed reading about "10mm Powder choices" here in TheHighRoad.org archive, you'll LOVE our community. Come join
TheHighRoad.org today for the full version!
vBulletin® v3.8.6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.