CZ75 or Sig P6


December 1, 2009, 10:21 PM
If caliber and condition are all the same, and you can only choose one. Which will be your pic?

If matters, CZ will have 10rd capacity mag.
CZ can either be Pre-B, B, BD.
Sig P6 can have all the 225 mods in it (trigger, hammer, springs and all).

If you enjoyed reading about "CZ75 or Sig P6" here in archive, you'll LOVE our community. Come join today for the full version!
December 2, 2009, 02:50 AM
CZ all the way!

December 2, 2009, 09:25 AM
They're both fine guns, but I'm kind of partial to the Sig myself.

December 2, 2009, 09:29 AM
cocked and locked, CZ

December 2, 2009, 05:30 PM
The one that you shoot better.

Personally, I would pick the P6 since I don't really care for the CZ's trigger. The fact that I have a P225 factors into this as well.

Coltman 77
December 2, 2009, 06:05 PM
Sorry guys, I'm going against the grain and with the Sig.

December 2, 2009, 08:31 PM
CZ 75 for me!!!!!!


December 2, 2009, 08:54 PM
+1 on CZ C&L

The Lone Haranguer
December 2, 2009, 08:55 PM
For a more "apples to apples" comparison I would put the PCR against the P6/P225. Both are the same caliber, of roughly equal size and have aluminum frames and decockers. In that case I would pick the PCR. For a scarcely larger grip you get six more rounds in the magazine, a better DA trigger and a better placed decocking lever.

December 2, 2009, 11:00 PM
yes, take a look at the pcr or p-01. the pcr is harder to find, but i see p-01s often.

have 24k rounds through one i use as a race gun and only had to replace springs recently. seen mud and rain, too.

i also carry an sp-01 that i shoot in uspsa production division. runs great.

December 3, 2009, 02:37 AM
I own a CZ 75 (in .40) and have shot a few sigs. I personally like the CZ because of 2 reasons. The first is that it points more naturally for me. Which translates to better and faster shots even if my grip isn't perfect.
The second is that I got the .22 LR Kadet conversion kit and man is that the best money I've spent in a long time! Nothing like shooting for pennies a round versus quarters a round. :-)

Jed Carter
December 3, 2009, 05:10 AM
I vote CZ 75 D PCR if the P6 is the same as the P225 in dimensions and barrel length. The CZ 75 B has a 5" barrel the P6 has a 3.86", the PCR 3.9". The SIG should be a lot easier to take apart for maintence, CZ magazines for the 75 are everywhere, and cheap, P6, P225 are harder to locate, but I'm not looking for them, so maybe not. Can you see the USA from California, you are lucky to even be able to own a pistol there.

December 3, 2009, 06:35 AM
If this is your first handgun you need to find out which handgun points naturally for you so you can pick the one that fits the best. Both guns are going to work well, it's just a question of which is the better fit.

December 3, 2009, 07:27 AM
i have both. if i could keep just one i would pick the p6 because:

1. the p6 is a better made higher quality pistol than the cz-75
2. the p6 is more accurate than the cz-75.

December 3, 2009, 06:56 PM
When Sig was closing out the P225 in 2000 I had a chance to buy one for the same price as a CZ-75D PCR. I chose the CZ, and couldn't be happier. Since then I bought a used Sig P228 because from what I read it was one of Sig's best guns. Guess what? It sits in the safe. The PCR is just superior. Lower bore axis, less blocky, slimmer and a bit smaller yet higher capacity AND more accurate. Quality seems about the same.

Glock Holiday
December 3, 2009, 10:01 PM
I've got both and I give a edge to my CZ 75D because it holds more ammo.
I guess I'd get the one that had the best deal on it if I could only pick one and didn't care about the magazine capacity that much.

December 3, 2009, 11:27 PM
Which one fits your hand better? Which everyone that is get that one.

If you enjoyed reading about "CZ75 or Sig P6" here in archive, you'll LOVE our community. Come join today for the full version!