Best 9mm for USPSA/IPSC
Dan The Goat
January 14, 2010, 10:44 AM
Does anyone shoot 9mm Glock in USPSA/IPSC matches that has a favorite handload they would like to share?
I currently have some 115gr JHPs but I'm open to using any bullet/powder.
If you enjoyed reading about "Best 9mm for USPSA/IPSC" here in TheHighRoad.org archive, you'll LOVE our community. Come join
TheHighRoad.org today for the full version!
Hk Dan
January 14, 2010, 10:56 AM
I use Montana Gold 115s over 4.9 grains of Bullseye.
I'll use Berry, Frontier, or Rainier plated bullets over the same powder--whatever I can get the best price on. This ain't Bullseye shooting, they just need to go where I point 'em.
:)
Dan
arkieron
January 14, 2010, 11:01 AM
125 gr lrn with 4gr Win 231. I am actualy at about 3.95 gr. to make minor. I had to put in a 15 lb recoil spring and uncaptured guide in my g34 to handle reloads reliably. If you don't do that, I beleive the glock will give you jams in some of the wierd positions you will shoot from.
cidirkona
January 14, 2010, 04:00 PM
125gr LRN with 3.9-4.0 (smack dab in the middle really) HP38 (same as win321.) at 1.125" and LWD barrel -- sounds identical to arkieron's load.
Functions flawlessly, but my 17 came with a different rod/spring so I'm not 100% sure what spring it is.
ants
January 14, 2010, 04:41 PM
3.3g Red Dot or Promo with 147g copper plated bullet at 1.130" to 1.140" oal.
Dan The Goat
January 15, 2010, 03:16 PM
Thanks ya'll
HK Dan: Are you using RN 115's?
Arkieron: Thanks for the advice on the reduced recoil spring
chbrow10
January 15, 2010, 07:08 PM
147 grain berry's plated
4.0 grains of W-231 or 3.8 grains of bullseye
138 power factor
Most glock mags won't like long stuff. I keep mine in the 1.130" neighborhood
If you enjoyed reading about "Best 9mm for USPSA/IPSC" here in TheHighRoad.org archive, you'll LOVE our community. Come join
TheHighRoad.org today for the full version!
vBulletin® v3.8.6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.