lee auto disc

I am trying to find a spacer for my Lee auto disc. Does anyone have a picture of one or is it a mythical creature like bigfoot. Been to Lee, Midway Cabellas etc not a picture in sight . Iwant to order one just want make sure I need one .I have 4 disc and the directions[I use that term loosely] say attache spacer like in pic above.Well the pic is beside and only has one disc in it. Then you throw the Lee riser in to the equation,makes me want to kick a cat or something.

Here's the riser spacer for the Lee Double Disk kit (it is included in the kit and goes between the hopper and the base):

$2 from Lee factory outlet (You need 2 and I believe $2 is for a set of 2): http://www.leeprecision.com/cgi/catalog/parts.cgi?1261362310.3920=90195

http://www.leeprecision.com/graphics/parts/2493.jpg

I'm a little confused. Are you talking about a double disk kit or a riser so the auto disk don't hit the primer tray? http://leeprecision.com/cgi/catalog/browse.cgi?1264975703.2059=/html/catalog/powhan1.html

They show the riser but not a pic of the double disk kit. It is 2 pieces of plastic about 1/4" tall and 2-1/2" long with a hole in the center for the screw to go when you slide it in between the hopper and base on the auto disk. It'll take a couple min for me to find mine but I can take a pic if you still need/want it.

Thanks bds but I believe russt is right. I want too use 2 disc on top of each other. I have no problems with the height of hopper just want increase my loads . Russt if you can send me a pic I'l dance at your wedding. Lees doesnt have a pic of it they just show 4 more disc. I just want to be sure I get the right thing.Thanx in advance.

You can see the hopper riser spacers just below the red powder hopper on either side of 2 stacked auto disks. It's the hopper riser spacers that RAISE the powder hopper. You also need 2 longer bolts to attach the spacers to the base ($0.50): http://www.leeprecision.com/cgi/catalog/parts.cgi?1261362310.3920=90195

You can buy the entire kit with 4 disks, 2 risers and 2 bolts for $11 at MidwayUSA: http://www.midwayusa.com/viewproduct/?productnumber=870920

http://www.realguns.com/images/pwdrmsrwithacinstal.gif http://www.leeprecision.com/graphics/parts/2493.jpg http://www.leeprecision.com/graphics/parts/1471.jpg