SIG WEst German 226 & trigger


PDA






tackleberry45
February 4, 2010, 08:25 PM
Anyone know if there is a "$.25 trigger job" like their is for a Glock? This thing was made in 1992 and the DA pull is REAL strong.

If you enjoyed reading about "SIG WEst German 226 & trigger" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Runningman
February 4, 2010, 10:32 PM
You can reduce trigger pull by changing out the 24 LB hammer spring to a lighter one from Wolff gun springs. But don't get to carried away going to light on the hammer spring or you may set off harder primers found in some ammunition.

Keep in mind the hammer spring also has another function. A hammer spring assist the recoil spring in controlling slide velocity. West German P226 uses about a 15 pound recoil spring. So you should get a slightly stronger fresh recoil spring such as around 16 LB or 18 LB (depending on power level of ammo) if you drop the hammer spring down to around 18, 19, 20 LBS.

If you enjoyed reading about "SIG WEst German 226 & trigger" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!