Bought a Hi-Standard .22 Revolver


PDA






KarlG
January 20, 2003, 11:15 PM
I bought a Hi-Standard model R-103 revolver Saturday. I bought it on impulse and don't know much about it (until I saw it, I didn't know Hi-STandard made revolvers). I figured I couldn't go wrong for $125.

If anbody has any information or experience with this model, please share.

The gun I bought has "Sentinal Deluxe" on the blued 6" barrel. The frame appears to be painted cast aluminum. It has a 9-shot cylinder. The grips are a one-piece faux stag. It is a nice looking little gun.

A trip to the range yesterday revealed that the cylinder doesn't want to turn too easily after a few rounds (I read Jim March's TFL post on revolvers. The cylinder gap may be too close.)

Thanks,

If you enjoyed reading about "Bought a Hi-Standard .22 Revolver" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
444
January 20, 2003, 11:21 PM
I inherited one of those years ago. It was a decent lower end revolver. It worked, it wasn't beautiful, it didn't exhibit exceptional accuracy, but it made a fine plinker and a decent all around .22 revolver. If you were interested in buying a .22 revolver, you didn't go wrong at that price.

Jim March
January 21, 2003, 03:32 AM
Hi-Standards were all generally pretty good guns. In the case of this one, if the cylinder gap is tight that's an easy fix, even a do-it-yourself thing with a small flat knife sharpening stone to the back of the barrel, gently and just a few strokes at a time and frequently checking it!

Make sure a tight gap is what's actually going on first.

Kahr carrier
January 21, 2003, 07:45 AM
$125. congrats great price.:)

Hemicuda
January 21, 2003, 07:56 AM
I paid $150.00 for a like new High Standard "Double-Nine" revolver a few years ago...

(I gave that one to dad, since his original, bought used by him in the early 60's was kinda wore out)

they are a great gun... I can tell you this... (I now own Pops' "wore out" one)... there's a roll pin in the frame that wears... replace that if it feels sloppy, and it'll cure alot of evils..

ALSO, to wear out this gun, Dad and his friend had to shoot a brick of ammo a week through it, for more than 10 years... (I am not kidding... I can remember him shooting it in the early 70's, when I was a kid... this was also the first handgun I ever shot!)

tomkatz
January 21, 2003, 03:07 PM
my first handgun in the 70s was a double 9, fond memories, wish I still had it.....tom

Nineisfine
January 21, 2003, 03:36 PM
I have a High Standard Sentinal that I bought new back in 1966 at the Rexall Drug Store in my home town. I think I paid under $50 for the gun. I was in high school and didn't have much money.

I would hate to have to count all of the rounds that I have run through my revolver. The finish isn't pretty anymore but it always goes bang and I still shoot it quite a bit.

My old Sentinal has always been accurate and has killed many times its own weight in tin cans over the years. I saw its duplicate in a local shop's used gun cabinet a couple of weeks ago and they were asking $135

Penman
January 21, 2003, 07:56 PM
I think it was in the mid 70's or so that High Standard changed the barrel configuration to an underlugged barrel, and offered the Sentinel in .22 Magnum also. A finish option was satin nickel. These seemed to have problems, including a heavy trigger pull on the magnum models. The older style of the Sentinel never got any bad reviews that I knew of. Too bad High Standard is gone, they produced some innovative designs (remember the 10B shotgun?) and some solid, reliable ones as well.

Standing Wolf
January 21, 2003, 09:09 PM
The best place for High Standard information I've found is Jim Spacek's site: http://users.ntplx.net/~tm/jspacek.htm

bountyhunter
January 22, 2003, 01:38 AM
I currently own a Double-9 as well. Fun to shoot, not real accurate past about 15 yards. Maybe it's because of the sights.

The cylinder on that gun seems to actually ride against the forcing cone as it rotates (no gap). The lock-up is very tight. DA trigger pull feels like about 25 pounds. Good practice for strengthening the trigger finger.

Tropical Z
January 22, 2003, 12:26 PM
I got a very nice NATO 49er recently for $75.00.I love it.Make sure you keep the front site well oiled as they have a tendency to rust.

KarlG
January 22, 2003, 10:52 PM
Jim March, There is NO gap like bountyhunter notes of his Double-9. I think this is the problem. I have a friend who lives close and has a lathe. I can take the barrel out and trim a thousandth at a time (and keep everything true).

Hemicuda, Are you referring to the pin ahead of the grip and below the hammer? I will watch for loose pins.

Thanks again,

leebonesgt350
March 24, 2008, 12:07 PM
I have a Hi-Standard "double-nine" revolver and holster that I'm selling. It is an older model that I bought about 30-35 years ago. It hasn't been fired in a long time and works great. There is no looseness that other people referred to in other posts. I used it for "plinking" and target practice. Is anyone interested in purchasing the gun or would venture a value.
Thanks.

dbarale
March 24, 2008, 02:07 PM
I have a friend who lives close and has a lathe. I can take the barrel out and trim a thousandth at a time (and keep everything true).


Honest question, maybe stupid: Why not shave the face of the cylinder instead?
Wouldn't it be easier than removing the barrel?

Edit: Just realized that this post was 5 years old! Sorry...

Moonclip
March 25, 2008, 10:29 PM
I hvae the snub version as well as a .22mag version. They are quirky and have variable qc but as for my .22lr version, while not the most acurate, it has NEVER misfired.

I'd like a cheaply priced 6" version.

publiuss
May 21, 2008, 10:35 PM
They're fair pistols and you paid what it's worth

sadp40
May 21, 2008, 10:49 PM
sentinel deluxe. mine is just like yours except mine is nickel. i love it. my mother grows exotic plants and the squirrels like to dig up the bulbs. i pop them from 40-50 yds away no sweat.

foghornl
May 22, 2008, 08:05 AM
That very tight cylinder/barrel gap COULD be just a crud build-up, if the gun has been shot A LOT and cleaned very little or not at all.

Moonclip
May 22, 2008, 08:50 AM
My .22mag Sentinel MKIV has a strange glitch. The firing pins travels to and fro in its chamber, no firing pin spring in design. If it is oriented forward, it impedes cylinder travel as it catches on the empty chambers. If loaded either with live rounds or cases this is not an issue at all.

Very strange and I suppose I'd not want to carry it with a live round under the hammer. I could carry it with a enpty case under the hammer and 8 more loaded but it is a strange design feature.

Anyone have any info on this?

theNoid
May 23, 2008, 03:02 PM
I have never shot any Hi Standards but I do know I would love to have their High Sierra model with the octagon barrel. What a looker and would be a great match to my Browning BL22 with octagon barrel.

Noidster

rcmodel
May 23, 2008, 04:53 PM
Whow! Hold on a sec!
Before you start facing off the barrel, a better method would be to correct the end-shake that is allowing the cylinder to move foreword that far.

Most of those High-Standards had a separate "Cylinder Bushing" in the front of the cylinder to adjust end-shake.

If yours has the bushing, make a new longer one on your friends lathe and push the cylinder back where it came from before it wore down.

If you face off the barrel and allow the cylinder to keep moving further foreword, eventually the firing pin won't reach the cartridges in the cylinder.

rcmodel

publiuss
May 27, 2008, 12:44 AM
My Grandfather had a Sentinel and it was his only carry weapon ever on the farm. Great shooting pistol, but was stolen. I bought one a couple of years ago that was also a great gun for $125.00 which is about right in my opinion. Someone had one for sale either here nor TFL not long ago for $350. I PM'd him and told him to let me know if he came down on what I thought was a ridicously high price. This obviously offended him greatly because he PM'd me back when some sucker paid that, for $125-150 dollar gun. They are great guns but they are not S&W's.

Lashlarue
May 27, 2008, 01:21 PM
Some people collect them, I had a snubby, which I guess is rare as the buyer paid me more than what new longer barrelled ones were going for.

Gord
May 27, 2008, 01:49 PM
Mine was $50 OTD a few years back.

It's a fun little guy to plink with, and more accurate than I'd expect for $50. It's not going to win any target (or beauty) competitions, but it'll do minute-of-jackrabbit at fifty yards without too much trouble. I wouldn't pay much more than $100 for it, though.

MCgunner
May 27, 2008, 02:10 PM
Got a friend who loves/collects double nines. Never thought they were all that special, myself, but he seems to think so. To each his own, I guess. :D They ARE good shooters, he just makes on about 'em until you wanna throw up. LOL!

jwr_747
May 27, 2008, 02:44 PM
have one I bought in 1968,still shoot it,have put several thousands of rounds thru it.looks rough but it works. jwr

deanodog
May 28, 2008, 08:51 AM
Here is one bought way back when. 67.00 new. It has a heavy double action but o k single action. Very accurate.
http://i31.photobucket.com/albums/c375/deanodog/revolvers/000_0189.jpg

If you enjoyed reading about "Bought a Hi-Standard .22 Revolver" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!