Lee dies Hornady LNL


PDA






wild willy
February 14, 2010, 04:04 PM
Does the lee 4 die set work ok in a Hornady LNL AP I know there has been posts in the past about some dies being threaded too short to work. Been using Redding and Rcbs thought Id try Lees

If you enjoyed reading about "Lee dies Hornady LNL" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
jbrown13
February 14, 2010, 04:05 PM
All the Lee dies I've tried on my LnL AP have worked to my satisfaction.

Walkalong
February 14, 2010, 04:54 PM
I have a number of Lee dies, old and new, and I have been able to make them all work. Very close to not enough threads on some, but they worked.

First die on the left (http://www.thehighroad.org/attachment.php?attachmentid=103338&d=1250284358) is a Lee sizer. Not much thread on the lock ring, but it works. It is an older die.

On this Lee .44 sizer (http://www.thehighroad.org/attachment.php?attachmentid=113395&stc=1&d=1263598869) (old die) there are no threads on the lock ring. The bushing pushes it against the top part of the die and locks down.

Old thread #1 (http://www.thehighroad.org/showthread.php?t=468796)

Old thread #2 (http://www.thehighroad.org/showthread.php?t=498600)

Randy1911
February 14, 2010, 05:04 PM
I use Lee dies on my LnL with no problems. I did switch the lock rings to Hornady ones (I don't like Lee lock rings).

If you enjoyed reading about "Lee dies Hornady LNL" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!