After Market Stocks for Savage Model 16 FCSS


PDA






Chizzy
February 21, 2010, 11:19 PM
Hello:

I was wondering if there are any after market stocks available for the Savage Model 16 FCSS. Ideally, I am looking for something that is synthetic in camo. The gun in question is a .223 Remington with a bottom detachable magazine. My gun has 3 action and trigger guard attachment screws on the bottom. The distance between the front action screw and the front trigger guard action screw measures 4.389" from center to center (instead of the 4.25" measurement found on the older models).

Thank you in advance for any advice you can provide me.

Regards,

Chizzy

If you enjoyed reading about "After Market Stocks for Savage Model 16 FCSS" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
jpwilly
February 21, 2010, 11:48 PM
Choate perhaps...see below:

Will my Savage rifle fit in to one of your stocks?
All but the early short actions rifles will fit in one of our stocks. If your rifle has a center to center hole spread of 4.275 for the short action or 5.062 for the long action or the controled feed short action which is 4.407 our stock will work. Some of the Savage 110 long action rifles come in short action calibers like 223 or 308 so you can't assume you have a short action based on the caliber. If you have a model 110,111, 1112, 114 or 116 your rifle is a long action if you have a model 10, 11, 12, or 16 your rifle is a short action. Our stocks will not fit rifles with detachable magazines with the button on the side. We do make a stock for the short action detachable magazine rifles that have the mag lever in front of the mag well.

If you enjoyed reading about "After Market Stocks for Savage Model 16 FCSS" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!