[unloved]

P3AT/LCP Pocket Holster

This one is for right hand carry.
The outside of the holster is flat, to prevent printing.

http://i683.photobucket.com/albums/vv195/unloved138/Kydex/003-3.jpg
The body side is molded for some retention. I've developed a little trick to control the depth of the molding so that they're not too tight. The gun won't fall out (like mine occasionally does when I use a nylon pocket holster), but draws easily.
http://i683.photobucket.com/albums/vv195/unloved138/Kydex/002-4.jpg

[gunnutery]

You do good work. Thanks for answering my questions on the other kydex thread.

[earlthegoat2]

Yikes, that thing will poke a hole right through your pocket.

Luckily the sharp end is on the other side than the valuables.

Little sandpaper could fix it though.

[usmarine0352_2005]

.
Yikes, that thing will poke a hole right through your pocket.

Luckily the sharp end is on the other side than the valuables.

Little sandpaper could fix it though.





That's what I thought too.

[unloved]

I guess I need to take a better photo. That point isn't actually sharp.


Glock 9mm Mag Pouch w/Adjustable Retention
http://i683.photobucket.com/albums/vv195/unloved138/Kydex/001-7-1.jpg

http://i683.photobucket.com/albums/vv195/unloved138/Kydex/002-5-1.jpg

http://i683.photobucket.com/albums/vv195/unloved138/Kydex/010-1.jpg

[unloved]

High ride OWB for my XD .40 SC
http://i683.photobucket.com/albums/vv195/unloved138/Kydex/002-9.jpg

I may never carry IWB again.:)

[1KPerDay]

Nice work. Looks professional. :cool:

[devildog4329]

very nice work. If you ever start selling items you make i would be interested.

[unloved]

Nice work. Looks professional.
Thanks. It is professional.:)
very nice work.
Thank you.

Synergy tuckable IWB for a P3AT. I made this one for a friend of mine.

http://i683.photobucket.com/albums/vv195/unloved138/Kydex/IMG_0159.jpg

The body side of the holster is curved,
http://i683.photobucket.com/albums/vv195/unloved138/Kydex/IMG_0161.jpg

but isn't formed to the pistol.
http://i683.photobucket.com/albums/vv195/unloved138/Kydex/IMG_0160.jpg

This eliminates pressure points, greatly increasing comfort.

[BRad704]

Very nice work! I wonder if the IWB's could have some type of felt or fabric glued on teh inside to soften the feel? And by inside, I mean body-side...

[Rxster]

A square of moleskin would make that tuckable very comfortable.
Very nice attention to detail.

[unloved]

G30 High Ride

http://i683.photobucket.com/albums/vv195/unloved138/Kydex/IMG_0406.jpg

http://i683.photobucket.com/albums/vv195/unloved138/Kydex/IMG_0407.jpg

[unloved]

Adjustable Ride Height Tuckable IWB
http://i683.photobucket.com/albums/vv195/unloved138/Kydex/IMG_0547.jpg
http://i683.photobucket.com/albums/vv195/unloved138/Kydex/IMG_0549.jpg

[unloved]

Some recently built holsters.

Sig P239, high ride, OWB, 15 degree FBI cant.
http://i683.photobucket.com/albums/vv195/unloved138/Kydex/IMG_0668.jpg

Sig P220, OWB, 15 degree FBI cant.
http://i683.photobucket.com/albums/vv195/unloved138/Kydex/IMG_0666.jpg

1911, OWB, 15 degree FBI cant.
http://i683.photobucket.com/albums/vv195/unloved138/Kydex/IMG_0665.jpg

G19, OWB, left hand, straight drop.
http://i683.photobucket.com/albums/vv195/unloved138/Kydex/IMG_0568.jpg

And a dual mag pouch design I came up with a few months ago.

They're IWB/OWB convertible, with adjustable retention.

For XD mags.
http://i683.photobucket.com/albums/vv195/unloved138/Kydex/IMG_0572.jpg
http://i683.photobucket.com/albums/vv195/unloved138/Kydex/IMG_0573.jpg

For Sig mags.
http://i683.photobucket.com/albums/vv195/unloved138/Kydex/IMG_0570.jpg
http://i683.photobucket.com/albums/vv195/unloved138/Kydex/IMG_0571.jpg[/QUOTE]

[BRad704]

Top notch work! as always...

[Seraph]

From one Kydexbender to another, that is some nice clean looking stuff.

[unloved]

Top notch work! as always...
Thanks, Brad.

From one Kydexbender to another, that is some nice clean looking stuff.
Thank you. I've seen some photos of your work. Very nice!