ESR load?


PDA






Marc257
March 8, 2010, 07:47 PM
I'm switching to ESR this year in IDPA and looking for a good lead bullet load. Anybody got a good suggestion. Have been loading with 231, Titegroup, and Clays, but I'm open to getting a new powder if I need to. Thanks.

If you enjoyed reading about "ESR load?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
jmorris
March 8, 2010, 10:24 PM
The best ESR load I came up with uses 45 GAP brass 3.8g of VVN310 with a 230g precision (the same load with cast should work too) OAL of 1.125" and a federal SPP. The SPP allows you the minimum trigger pull with 100% reliability. The GAP brass also moons/demoons without tools. Keep your eye out in the reloading section below and you can find some pretty cheap.

FWIW I tried clays, titegroup, hs-6 and a few others the 310 was the best.

If you enjoyed reading about "ESR load?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!