Suppressed AK?


PDA






Tim Pierce
April 16, 2010, 11:56 AM
I have an M92 Yugo Krink SBR. I would like to suppress it. Does anyone make an adapter for the barrel threads that will work with a suppressor?

If you enjoyed reading about "Suppressed AK?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
DoubleTapDrew
April 16, 2010, 02:54 PM
These guys can make an adapter for just about anything. Nice folks to deal with as well.
http://www.trosusa.com/

CleverNickname
April 16, 2010, 11:44 PM
Yes, Gemtech at least makes a 14x1 LH threaded adapter for use with their .308 HVT. I tried it on my AK and was underwhelmed. I'll sell you the adapter for cheap if you're interested. :)

TheHossUSMC
April 17, 2010, 05:03 AM
yhm combos thats where its at.

crushbup
April 17, 2010, 12:52 PM
Just be careful to make sure your threading is concentric to the bore. AK barrels aren't known for being straight as possible. Otherwise, baffle strikes are a huge possibility. There's a case on Silencertalk where an AK basically detonated the core of someone's suppressor.

Ranb
April 17, 2010, 03:30 PM
I made a silencer for my WASR. I was underwhelmed also. I made mine a two point mounted can because I was not able to make the muzzle threads straight enough. I get los of noise from the gas vent near the front sight and the trigger slaps back a bit painfully. I get poor accuracy and proper feeding (the nose jams in the receiver when cycled manually) with my 220 grain subsonic loads

I have read of others that are happy with their suppressed AK's, but I am not one of them. But it only put me out the $200 a plus the scrap metal left over from other projects.

Ranb

If you enjoyed reading about "Suppressed AK?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!