Stealthy two ways: quiet AND concealable!


PDA






dcloudy777@aol.com
June 9, 2010, 11:56 PM
Just wanted to show off a crappy picture of my "compact suppressed" rig. Thompson Machine Poseidon on a S&W M&P9C host.
http://img.photobucket.com/albums/v220/dcloudy777/001-1.jpg
Now I gotta learn how to make kydex holsters... I could easily carry this concealed if I had a proper holster.

DanO

If you enjoyed reading about "Stealthy two ways: quiet AND concealable!" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Zundfolge
June 10, 2010, 12:33 AM
Just make sure you can pack a suppressed pistol with your CHL. Here in Colorado CCW of NFA items is verboten ... mostly that's aimed at SBRs and SBSs but unfortunately suppressors fall under the same rule here :(

But yeah, with the right leather (or Kydex) that would be cool.

Double Naught Spy
June 10, 2010, 09:44 AM
I am not sure that adding 3-4" to the length of the gun keeps it in the category of "quite concealable" per se. I mean, I can conceal my shotgun under a coat as well and I have a buddy who has carried is S&W .500 revolver concealed (just to show he could) and it was a huge sucker.

Still, nice rig.

highorder
June 10, 2010, 10:57 AM
Who makes a threaded barrel for my full size M&P9?

What do you think of the Thompson Machine Poseidon?

How are the wipes? How long do they last?

waterhouse
June 10, 2010, 11:29 AM
Wow, that is tiny. How does it sound?

Ironman
June 10, 2010, 12:14 PM
Hey brother,

Ive seen your setup on Silencertalk(fireman1291 here) nice rig.

To answer waterhouse, with wipes in place and 5cc-8cc gel or water it should last approx 20shots with FMJ 147grn ammo and sound like a bbgun. The wipes will be increasingly worn out shot after shot and the gun will get louder, until you change the wipes.

armoredman
June 10, 2010, 01:58 PM
Interesting. Here in AZ anything lawfully owned can be carried, so you would be legal. I didn't think suppressors were getting that small.

dcloudy777@aol.com
June 10, 2010, 05:08 PM
The last year or so has seen a surge of development in smaller suppressor technology, particularly in 9mm and .22 cans. I think this is primarily due to the sound reduction of these suppressors has reached such incredible performance as to make building quieter suppressors very difficult and not particularly useful. The gunshot in a good .22 can with subsonic ammo is less than the noise of the action or bullet flight, and 9mm performance is very nearly as good. To build "a better mousetrap" now requires something other than noise reduction, like durability, minimal POI shift, or compact size. Several companies like Thompson and DeGroat have revived "old school" tech like wipes, once necessary to achieve adequate noise reduction, are now being used to get "plenty quiet enough" noise reduction in very small platforms. Progress is cool! :cool:

DanO

dcloudy777@aol.com
June 11, 2010, 04:10 PM
Here's another, Thompson Machine's Wasp suppressor with a Beretta 21A host...
http://img.photobucket.com/albums/v220/dcloudy777/006-2.jpg
(I promise I don't work for Thompson, I just really dig their stuff). I love this rig. It fits in a jacket pocket, and even dry it's quiet enough to not sound anything like a gunshot. Wet, it's almost as quiet as my bigger 22 cans.

DanO

tooltech
June 16, 2010, 02:01 AM
Does the laser clear the can?

dcloudy777@aol.com
June 16, 2010, 02:38 AM
Yep.

riccw
June 16, 2010, 11:40 PM
That's awesome... ! know if RI allows them during CCW?

FIVETWOSEVEN
June 17, 2010, 02:45 PM
How much of a decibel reduction are we talking about?

Dnaltrop
June 17, 2010, 02:52 PM
Highorder, I think stormlake makes the threaded barrels. order cheaper from brownells or any distributor.

http://www.stormlakebarrel.com/barrels

highorder
June 17, 2010, 06:22 PM
Thanks for the info!

Arkady
June 19, 2010, 01:03 PM
FIVETWOSEVEN: http://silencerresearch.com/degroat_nano_vs_thompson_machine_poseidon.htm

The review is free to anyone registered (even non-paying members) with the site.

Fired wet, with subsonic ammo, the Poseidon was hear-safe according to a meter 15 cm from the shooter's ear.

Zanad
June 19, 2010, 02:00 PM
any chance you can do a youtube vid on this? I'm pretty sure I'm not the only one to see how quiet this shoots.

Gerald in Ga
June 23, 2010, 09:38 AM
Howdy,
Does anyone have an address on Thompson Machine? I will be in Florida soon and would like to drop by to see their products if it is on my route.
Thanks

Gerald in Ga
June 24, 2010, 07:50 AM
Does anyone know?

highorder
June 24, 2010, 12:56 PM
From their site:

Thompson Machine is a Florida-based company working primarily in the firearm industry. We have been in operation as a working machine shop since 1991 providing rapid prototyping and design services .

In addition to our rapid prototyping services, we offer an ever-expanding line of suppressors as well as a number of billet AR-15 type upper and lower receivers.

We pride ourselves on the quality and ingenuity of our products and are committed to pushing the envelope in firearm and sound suppressor design, while still keeping our products affordable for nearly every shooter.

For info Richard@ThompsonMachine.net

Gerald in Ga
June 24, 2010, 10:34 PM
Went to the site. It does not say where. No reply to e-mail either.

If you enjoyed reading about "Stealthy two ways: quiet AND concealable!" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!