Norinco 1911 Sights


PDA






Babarsac
June 15, 2010, 07:22 PM
I have a Norinco 1911 on which the sight paint has completely faded away over time. I want to replace the sights but some people have told me that replacement 1911 sights won't drop in and I'd have to get the slide milled :what:

Has anyone undertaken a similar project? If worst comes to worst I might just try to get some type of sight paint.

If you enjoyed reading about "Norinco 1911 Sights" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
The Lone Haranguer
June 15, 2010, 08:41 PM
IF the gun has standard dimension rear sight dovetail slots and front sight tenon holes in the slide (the front sight is staked in from the underside), standard sights should work and you should not need any slide machine work unless you wish to have a dovetailed front sight. Many gunsmiths do recommend it but it is not absolutely necessary.

Oro
June 15, 2010, 10:01 PM
The Norinco has normal sight cuts. I can't recall if the front is narrow or wide tenon, but standard sights will work.

Mine were replaced with tall three-dot sights, like what you would find on a new Colt. They work well, and went into the stock rear cut and front sight tenon hole.

schmeky
June 15, 2010, 11:14 PM
Oro is right, the Nork is true Series 70 copy, the front sight is a narrow tennon.

combatantr2
June 16, 2010, 09:45 AM
goodluck with the milling though. :evil:

If you enjoyed reading about "Norinco 1911 Sights" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!