NAA Mini Revolver guys


June 15, 2010, 10:30 PM
What do you guys use as a pocket holster for your .22 mini revolvers ?
I have the .22LR Mini and just dont want to let it sit in my pocket and boucve around and all . Any good functional pocket holsters for them ?

If you enjoyed reading about "NAA Mini Revolver guys" here in archive, you'll LOVE our community. Come join today for the full version!
Carne Frio
June 15, 2010, 10:51 PM
NAA has holsters for sale. I don't carry mine; it's just a range toy for me.

June 16, 2010, 08:25 AM
I got one from Shark-Tac ( (warning amateur website!) but it was mostly because they were at a show and making Kydex holsters and tweaking them right in front of you, which was pretty cool and surprisingly affordable.
I really don't carry my NAA mini though, even though I have a holster just right for it and my pockets in most pants.

I hear good things about Mika's pocket holsters, for BUG and BUG-size guns.

A Kydex kit might be the ticket, dig up some holster pictures and use them for ideas, a NAA mini in .22LR would probably use half a Kydex sheet at most, giving you one chance to screw it up.

June 16, 2010, 08:38 AM
I use the NAA Holster Grip for mine:

June 16, 2010, 10:32 AM
I used to use the suede IWB holster that NAA included with their revolvers when I pocket-carried the two that I had. I regret to report that it was not an infrequent occurrence (half the time?) with both of these guns to find that, somehow during the day, the hammer had bounced up out of the between-the-chambers notch and was now resting on the primer of a cartridge. Ungood. This combined with the slowness of actuating the things, their practical inaccuracy, and their abysmal penetration and velocity led me to sell mine off.

Anyhow, don't use the suede NAA IWB in your pocket with these - get a kydex by Grandfather Oak or someone . . . the friction fit of the kydex should help the cylinder not turn in your pocket.

Steve 48
June 16, 2010, 10:40 AM
I bought one from NAA for my mini pug in 22 mag. Works for me!

June 16, 2010, 12:27 PM
I have used pocket holsters for the minis but they are also tiny and usually come out with the gun. I use an old wallet that I rigged as a holster that stays put or I use a neck holster on the rare occasions I actually carry a mini.

June 16, 2010, 09:04 PM
picked up a really comfortable pocket holster from SIMPLY RUGGED. It even has a little pouch that you can hold an extra 5 shots in. Lightweight, low profile in the dress pants, easy to draw from and keeps the gun clean and dry....... $25.

June 16, 2010, 09:13 PM
Pouch ( I made many, many, years ago. My home made holster ( is much faster, but not as concealable.

June 16, 2010, 09:28 PM
got a no name nylon clip iwb many years ago at a gun show

June 16, 2010, 10:08 PM
The Rybka one (sp?) that NAA sells. Works well enough

June 16, 2010, 10:38 PM
GEM , you mean the suede pocket holster on NAA's website ?

June 18, 2010, 04:02 PM
I am gonna take some old leather I have at the house and get a leather needle and some waxed nylon thread and make my own . When it gets done I will post some pics .
It may not look good but should function good .

June 18, 2010, 04:28 PM
I am gonna take some old leather I have at the house and get a leather needle and some waxed nylon thread and make my own .That is what I did.

Pic Link (

Harley Rider 55
June 18, 2010, 04:29 PM
The revolver Bob Munden used to hit a steel plate at 100 yards.

June 18, 2010, 06:03 PM
Back when I still had a Mini, I used one of NAA's IWB holsters, clipped onto a square of thick, stiff leather. Worked well enough for me.

June 20, 2010, 12:38 PM
This one:

HPT-M @ $30.00 each

Erik M
June 20, 2010, 03:56 PM
My brother has the same model as landric that he carries as a bug for his EAA Witness.

June 21, 2010, 01:28 PM
Check out John Locey's website,

He specialized in pocket hoslters for NAA minis. I have one for my Pug and the workmanship is outstanding.

He molds the holster to fit in the cylincer flutes, there is no chance of it turning out of the safety notch.

Ala Dan
June 21, 2010, 04:06 PM
I have both, the 1-1/8" barrel NAA .22 magnum, as well as the NAA .22LR.
With a little altercation, an empty flip-top box of Marlboro cigarettes makes
for an excellent "deep cover" concealed handgun; and works well for under
cover drug agents that otherwise can't tote a noticeable firearm~! Only a
slight problem here, I am not a smoker; so that would be a dead give-away
to the "street wise" creeps that prowl our neighborhoods~! :uhoh: ;)

June 21, 2010, 04:19 PM
I use the NAA Holster Grip for mine:

Plus one. My .22LR model has some wear on it, 25 years in a pocket. :D

June 22, 2010, 10:29 PM
38snapcaps, thanks for that link ! Thats some neat little holsters. Very good workmanship . I may get one of those too .

July 7, 2010, 08:52 PM
hey guys I got my Holster from Concealment Holster solutions by John Losey . Man!!!! IT is nice and AWESOME !!!!!!!!!!!!!
Here it is !!!!!

July 7, 2010, 10:03 PM
That looks pretty spiffy.

I assume the grooves help keep the cylinder in the safety notch position?

July 11, 2010, 09:51 PM
Yes they do . Mr. John Losely is an awesome dude! Fast and excellent work .
Just $30 shipped and all . Shipping is included in the price .

If you enjoyed reading about "NAA Mini Revolver guys" here in archive, you'll LOVE our community. Come join today for the full version!