Recoil Spring and Guide Rod Suggestions for Glock 29?


PDA






SKILCZ
June 27, 2010, 09:15 PM
I know people swap out the guide rods and springs in a Glock 20, but do they also do that in a 29? If so, why, and with which strength spring and which guide rod? Thanks!

If you enjoyed reading about "Recoil Spring and Guide Rod Suggestions for Glock 29?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
easyg
June 28, 2010, 11:52 AM
Is it giving you any problems with the stock spring and rod?

NG VI
June 28, 2010, 12:05 PM
I'm with easy on this one, why?

JoelSteinbach
June 28, 2010, 02:10 PM
never had a priblem with mine, the 29 is a great little shooter

ButchG17
June 29, 2010, 11:57 AM
Yup, best to find a problem prior to fixing it, otherwise one is more likely to just create a problem.

The G29 is great the way it is, don't worry, go shoot!

wow6599
June 29, 2010, 03:21 PM
If you are going to be shooting standard factory ammo (watered down) then I wouldn't change a thing. If you're going to be loading your own "real" 10mm stuff or DT & BB then I would go up to a Wolff 21lb spring.

easyg
June 29, 2010, 04:55 PM
If you're going to be loading your own "real" 10mm stuff or DT & BB then I would go up to a Wolff 21lb spring.
Good advice I'm sure.

But be advised that shooting your own loads out of a Glock and/or using non-Glock after-market parts will void the manufacturer's warranty.

Just so you know.

Easy

nickE10mm
June 30, 2010, 02:50 AM
I've never used an after market rod / spring on my G29 and shoot mostly VERY warm or full house loads... never a problem.

SKILCZ
June 30, 2010, 05:43 PM
Thanks for the replies!

Strahley
June 30, 2010, 09:26 PM
The one it comes with out of the factory

Haifisch
June 30, 2010, 10:36 PM
How about the Glock 20 ?

Shawn Dodson
June 30, 2010, 10:38 PM
If it ain't broke...don't fudge with it.

If you enjoyed reading about "Recoil Spring and Guide Rod Suggestions for Glock 29?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!