[PCRCCW]

Alright CZHeads.........yesterday the ATF got on/off the stick and approved the CZRami for Importation...........:D :D :D :D

So get your check books and visa's ready....

They will be ready for purchase in FEB 2004

Straight from the head of CZUSA....................:D

Shoot well.....

[CZ 75 BD]

My wife always asks what I want for my birthday:D

[u084708]

Looks like a nice CZ, but at 24.5 oz empty and 28.6 oz loaded, it seems that it's an uphill battle with the Kahr PM9 or P9 Covert, which weigh much less (they also hold 6+1 or 7+1, rather than 10 rnds of 9mm). I love my CZs, but the Kahr will be easier to carry. Just a thought.

[George Hill]

YES!:D :D :D

[Master Blaster]

what is an RAMI???????

Is it smaller lighter or more accurate than a glock 26??
Will it fit in a pocket holster like a 26?????

I'm sure that it will be less expensive than a KAHR or the Glock 26.

[clipse]

http://www.czub.cz/products/firearms/CZ_2075_RAMI/CZ_2075_RAMI.jpg

The CZ 2075 RAMI is semi-automatic handgun designed for aimed shooting at distances up to 50 m. This handgun is ideal for an individual defence be it in the civilian use or as a back-up handgun for military and law enforcement personnel. The CZ 2075 RAMI operational properties are based upon time-proven locked breech recoil operated principle where barrel locking surfaces mate at slide's ejection port. The CZ 2075 RAMI incorporates several positive safety devices as are firing pin block, hammer safety notch and manual safety thus substantially enhancing this model inherited safety features.


This is from www.czub.cz

[Kevlarman]

Yay!

I sure hope it can be bought in California though. :(

[Zundfolge]

So whats the street price going to be on these?

I bet they go for a bit more then the MSRP at first.

[PCRCCW]

MSRP is 559$ but I HIGHLY doubt they will sell for that..........Not ONE CZ Ive ever heard of ............did.

Shoot well.

[BevrFevr]

:D :D :D

-bevr

[mbott]

I do need a new .40 cal CZ! :)

--
Mike

[CZ-100]

COOL!! :evil:

[Justin]

WOOT! HAPPY DANCE!


:D

[tomkatz]

http://www.glocktalk.com/images/smilies/banana.gif

[mrapathy2000]

probably $300-$400 range.

I dont care for the rami I want the cz110 myself.

[tango3065]

You guys really think it go for 300-400 dollar range if so that will be my next gun. Even though they are due out in Feb I'll bet we wont see them in my area till around Apr. The rami has been out for a few years in other countries does anyone know the durability and reliability of it? Also what other guns does it compare to in size , by the picture it looks like about the size of a glock 19 but pictures can fool you.

[armoredman]

I want one, and the CZ75D Compact steel frame they don't import anymore....

[NJ3]

RAMI (http://www.czub.cz/_en/pages/zbrane.php?type=CZ+2075+RAMI)

The above link gives some dimensions.

[racenutz]

What's up with the slide stop?

[Jeff OTMG]

This is how small it is:
http://www.shotshowreports.com/images/2003/CZ40M.JPG

The slide stop is different to reduce the width of the pistol. To release you should be slingshotting the slide anyway, as on a Walther PP series.

[tomkatz]

What's up with the slide stop?

it doesn't have a slide stop.....

I think the size should roughly compare to the glock 26/27/33, barrel is 1/2 inch shorter than the baby glock though......tom

[Wildalaska]

Wasnt impressed till I saw the above pics and did some calcs

Its approx 1.24 inches longer than a Seecamp, 1/2 inch higer and 1/2 inch wider.

:) :)...

Group buy? Shall I call in the favors I have with certain suppliers?

Me gonna get one in 9mm


WildfinallyanewmanufacturedpistoltogetexcitedaboutAlaska

[George Hill]

I'm thinking for the .40, the 135 grain load from Cor-Bon would be ideal.
For 9mm... I'm not sure. Perhaps some 115 to 124 grain loads would be nice.

[tomkatz]

WildgetusadealAlaska.....groupbuy sounds like a plan to me:D ....tom

[Wildalaska]

Gonna call on Monday....

Got a feeling demand is gonna exceed supply intially.

WildnewtoyAlaska

[tomkatz]

Gonna call on Monday....

hey ken, put me down for a 9'er too, you already have my ffl on file:D
if the price is what we think, I am in......this is one gun I think already has the bugs thrashed out of it, since it's been out for awhile in the rest of the world (thanks BATF:rolleyes: )......tom

[Roz]

Ken,

Put me down for one too. I shouldn't have bought that P-01! You have my FFL on file from the P7 purchase.

[Wildalaska]

Looks like it weighs about 6 oz more than a Seecamp..

Nice becasue I carry in my back pocket most of the time....

Any evals of this pistola anywhere?

WiltheonlyhtingisavailabilityAlaska

[racenutz]

The slide stop is different to reduce the width of the pistol.

Wow, I didn't realize it was that small!!!

[jdrobins]

Ken, depending on price I'm in for a 9mm also!

Jim

[keederdag]

First thing Ive gotton exited about in a long time (not counting the checkout girl 15 min. ago):D

[CZ 75 BD]

Group buy:)

[Wildalaska]

Ya know the way to do this would be to see how many pistolas I would have to convince the bosess we need to buy to become a CZ distributor :)

WildplttinandscheminAlaska

[incursion]

Isn't the Kahr K9/P9 smaller?

[Ky Larry]

I'm gonna get one in .40 S&W. I'll see my dealer on Monday and place my order.

[NJ3]

Isn't the Kahr K9/P9 smaller?

Yes, the K9/K40 and P9/P40 are smaller. The K9/K40 are a bit heavier though.

[MaterDei]

OK, who's holding that pistol? Andre the Giant? :D

[Selfdfenz]

Make mine a 9 me thinks.

If you work at CZ and lurk this board reading these posts has to make you feel great.

If this little pocket rocket runs, success is pretty much assured. Cocked and locked, SA/DA, ten shots in a palm sized package and it's metal...what's not to like. Already has a slight melt on the business end too!

I can hardly wait.

S-

[Morgan]

Condition one? Looks like it, but I can't find confirmation.

Also, does it take 75 series magazines?

[Zundfolge]

Here's the RAMI vs a Kahr K9

RAMI 9mm
Overall Length = 6.57"
Height = 4.72"
Width = 1.26"
Weight (with magazine) = 24.5oz

Kahr K9
Overall Length = 6"
Height = 4.5"
Width = .90"
Weight (with magazine) = 26oz

I'm kinda disapointed ... based on the photos (especially the one in ol' Sasquatch's paw) I expected it to be between the size of a Kahr K9 and MK9 :(

Looks like it has a slight weight advantage and higher capacity, and a DA/SA trigger, but based on its size my entheusium is a bit dampened ... think I'd rather have a Kahr K9/K40, P9/P40 or Steyr S9/S40. ( I guess if my current carry gun was a CZ PCR or CZ 75 Compact I might feel different)

[Jeff OTMG]

That is Mike Eagleshield's hand in the photo. He has shown it to me for a few years at the SHOT Show, but I was never allowed to show a full picture until this year. Mike is a big fella, but not real tall. I would not consider his hand huge by any means.

[tomkatz]

Some of that length is due to more beavertail than the kahr k9.....so basically you have a gun that is very close in size to the kahr, with less weight, more width, and 3 more rounds in 9mm, and it should cost substantially less. It compares pretty good with baby glocks too.
I have both these guns and if the rami is the gun I think it is, it will replace those two for me(and then I will start working towards the rohrbaugh:D) .....tom

[keederdag]

The only part that truly interests me is the traditional DA action. You dont have this with the Kahr, kel-tec, Robotburg or whatever? Just what I am most comfortable with. I own two Glock 26's but shoot them rarely. when I shot glocks, I shot glocks.....now I shoot other stuff, glocks and DAO's feel just plain wierd to me. :)

[concerned citizen]

This is a CZ I am interested in!


;)

[PCRCCW]

It is Cond 1 capable....same old CZ trigger mechanism. And the pic does make it look smaller than it is..........

I may have one on the way for holsters fairly soon.........any takers? :D

Shoot well................

[Daniel T]

As I've said before: "Me want!"

I think I'll be getting in on that group buy, Wild.

[MaterDei]

Gonna call on Monday....

Got a feeling demand is gonna exceed supply intially.

Not to be pushy Wild...but...It's Monday!!!

[Michael_2112]

I can hardly wait to this little fella comes home with me. February....I really hope so, hopefully it makes the rounds in my part of the country by spring.

[Wildalaska]

Group Buy (http://www.thehighroad.org/showthread.php?s=&threadid=53649)

WildwheelinanddealinAlaska

[Correia]

PCRCCW, when you get that thing in, want to go shooting? :)

[Hellbore]

Put me down for a RAMI .40 please!! :D