Help - Need Power Pistol data for 10mm 165 grain lead TCs


PDA






twhman
August 1, 2010, 06:19 PM
I would like to load some nice mild target loads for my 1006. I have 165 grain lead TCs and and 1lb of Power Pistol. I believe that is a pretty decent powder for 10mm. However, I cannot find the load data for 165 grain lead. I found some 170 jacketed data with a starting load of 6.8 grains of Power Pistol under the 170 jacketed. I found 155 lead data with a starting load of 8.6 of Power Pistol under a 155 LFP. Just want a fun load mild/moderate load to shoot at the range and cannot find the load data to support 165 lead TCs - figures I buy the odd ball bullet weight. Thanks for the assistance.

If you enjoyed reading about "Help - Need Power Pistol data for 10mm 165 grain lead TCs" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
TonyT
August 2, 2010, 04:36 PM
PM me your e-mail and i'll forward a page from the Alliant 2005 reloading guidw which lists loads for 155 and 180 gr. cast lead bullets.

Peter M. Eick
August 2, 2010, 08:16 PM
http://www.alliantpowder.com/

here get it yourself so there is no confusion.

Just click on the reloaders guide.

twhman
August 3, 2010, 09:14 AM
What adjustments would I need to make for my 170s based on 155 or 180 data? I am kind of new to reloading.

Peter M. Eick
August 3, 2010, 09:51 PM
If you load for a heavier bullet, you should normally be fine. Of course work up slowly.

Thus if you have 170's, look up data for 180's and use it instead.

If you enjoyed reading about "Help - Need Power Pistol data for 10mm 165 grain lead TCs" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!