The Ultimate Defensive Glock 19 Pictures


PDA






lostone1413
August 26, 2010, 11:53 AM
Here is how I had my Glock done. To me it makes it the best defensive Glock you can have. If your interested in who done it for me send me a message and I'll tell you how to get in touch with him. When I got the Glock I took it shooting right away. Being 60 and bad eyes I was shooting better then I have shot in 30 years!!!!!! Let me know what you think of it. The sight is a fastfire

http://www.flickr.com/photos/1779534...7624676163487/

If you enjoyed reading about "The Ultimate Defensive Glock 19 Pictures" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
lostone1413
August 26, 2010, 11:54 AM
try this link

http://www.flickr.com/photos/17795349@N08/sets/72157624676163487/

pikid89
August 26, 2010, 11:57 AM
do the irons co witness...or at least are they visible when the red dot is off/dead/brokeded

357reloading
August 26, 2010, 12:10 PM
have a similar set up on a glock 17L with a aimpoint micro red dot
works great

KodiakBeer
August 26, 2010, 12:42 PM
All Glocks are extremely desevsive; that goes without saying...

docnyt
August 26, 2010, 12:45 PM
All Glocks are extremely desevsive; that goes without saying...
LOL. I was gonna say something about that but you beat me to it.

CoRoMo
August 26, 2010, 12:48 PM
If only my XD was desevsive. If only.

EdLaver
August 26, 2010, 02:11 PM
:D @ Coromo

Ben86
August 26, 2010, 02:34 PM
Derisive, divisive? Cool sight though. What does it take to drill and tap that slide?

David E
August 26, 2010, 03:15 PM
What does it take to drill and tap that slide?

Nothing, it utilizes the existing rear sight dovetail.

FatPants
August 26, 2010, 04:05 PM
Nothing, it utilizes the existing rear sight dovetail.
That does not appear to be the case. It looks like his existing rear sight is still in the stock dovetail, and the slide has been milled down to mount the sight.

9mmepiphany
August 26, 2010, 05:33 PM
the slide has been milled down to mount the sight.
That is what it looks like to me too, the slide has been deeply relieved between the rear sight dovetail and the ejection port

oasis618
August 26, 2010, 05:54 PM
If only my XD was desevsive. If only.

:cool:

Sgt_R
August 26, 2010, 07:50 PM
Looks a bit bulky for EDC, not to mention difficult to find a holster for. I prefer good ol' tritium.

R

SharpsDressedMan
August 26, 2010, 08:06 PM
I have seen them done with the sight base directly milled over the rear sight slot, set into the slide. I think I would like the look of that better than having the rear sight sitting behind the sight. As far as holstering, I think a Blade-Tech holster would give enough security/coverage, and leave the rear sight area clear. I would REALLY like a kydex holster that ALSO encloses the sight enough to shut it off while holstered (like the sight cover dies), and then the sight would become active (on) when drawn. Now THAT would be a setup!

meef
August 26, 2010, 08:24 PM
::gone::

smince
August 26, 2010, 09:11 PM
Seraphim AIWB holster for Red Dot Sights

http://www.onesourcetactical.com/archangelappendixcarryaiwbappendixinsidethewaistband-1.aspx

http://www.onesourcetactical.com/images/products/detail/IMG_1154.jpg

smince
August 26, 2010, 09:18 PM
My G19 w/J-Point. Not milled, but an Aristocrat dovetail mount. The mount has a small bit of windage adjustment, coupled with a .335 front sight mine does co-witness:

http://i265.photobucket.com/albums/ii219/msmince/HPIM1423.jpg

http://i265.photobucket.com/albums/ii219/msmince/HPIM1429.jpg

My 19 isn't too bulky for EDC.

Atticum
August 27, 2010, 11:11 AM
Bowie Tactical will do it for you

Strahley
August 27, 2010, 11:21 AM
Neat I guess, but I shoot my stock as a rock G19 just fine without such additions

lostone1413
August 27, 2010, 01:58 PM
Yep. They milled the slide in front of the dovetail and mounted the fastfire. That way they could use the dovetail for the rear suppressor sight. At first I had just the dovetail mount for the fastfire. Then I was thinking odds seem to favor what can go wrong will go wrong at the worst time. So I had the slide milled and added the iron sights. Just in case something would happen and the red dot goes out at the worst time I still have the iron sights to fall back on. Also many say that the iron sights also help picking up the dot faster. But with me even with the dovetail mount I could pick up the dot real fast. I just wanted all bases covered if something did go wrong when things went bump in the night

Derek Zeanah
August 27, 2010, 02:02 PM
(fixed the title.)

kris7047th
August 27, 2010, 02:23 PM
from Malabar Front... not as *bulky* The pic was taken last early May, and I now wear a Ares Gear belt instead of the Wilderness in the pic. I also have a Raven mag carrier worn on my left side when needed. The body shield works well to direct the gun into the holster.
(2nd pic, IWB loops were switched out as shown in the 1st pic.)

M&P9C

smince
August 27, 2010, 09:28 PM
I would REALLY like a kydex holster that ALSO encloses the sight enough to shut it off while holstered (like the sight cover dies),Concealment will do basically the same thing. Your sight is in the dark (under you shirt or jacket), and will 'power down' to a lower level.

If you enjoyed reading about "The Ultimate Defensive Glock 19 Pictures" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!