Ajax Grips


August 31, 2010, 08:58 PM
OK guys and gals I need your help on a wild goosechase. As you know I'm in the Polymer Gun Grip business and have been for several years now, doing so as more of a hobby than anything. Well my primary business has done well and I'm looking at using some of those proceeds to expand the 2RCo line into a bit more of a market force. That being said Ajax filed Bankruptcy and dropped off the planet last December and I would be interested in getting ahold of their designs and equipment in order to quickly expand my offerings.

If anyone can get me into contact with whoever holds their designs and equipment please PM me. PS if you all can help me out I will make it worth the while for all THR members with generous discounts on the new line.



If you enjoyed reading about "Ajax Grips" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
dogtown tom
August 31, 2010, 09:22 PM
Ajax Grips
9130 Viscount Row
Dallas, TX 75247
(214) 630-8893
Business Contact and Profile
Name: Ajax Custom Grips, Inc.
Phone: (214) 630-8893
Fax: (214) 630-4942
Additional Address: PO Box 560129
Dallas, TX 75247

Website: www.ajaxgrips.com
Original Business Start Date: January 1967
New Owner Date: January 1990
Principal: Mr. Norman Rosenberg, President
Customer Contact: Mr. Norman Rosenberg, President - (214) 630-8893
Email Address: Send email to Ajax Custom Grips, Inc.
Type of Business: Manufacturers & Producers
BBB Accreditation: This company is not a BBB Accredited business.
Additional DBA Names: Ajax Shooter Supply

On December 1, 2009, the company filed for bankruptcy under Chapter 7 of the federal Bankruptcy Act, case number 09-38295-sg7. Those with monetary claims against the company are advised to obtain a Proof of Claim form by writing to Texas Northern District Court CM/ECF, 1100 Commerce St. Room 1254, Dallas, TX, 75242 for resubmission to that court. The case number should be entered on the form.

August 31, 2010, 09:24 PM

Thanks for the BBB info although I've called the contact numbers and will send a letter. I may also check with the Texas Northern District Court.

Full Metal Jacket
August 31, 2010, 09:58 PM
maybe the bankruptcy court's records are public info?

September 1, 2010, 11:55 AM
You'll need to contact the Bankruptcy court using the case no. information dogtown tom posted, and likely sign up for the PACER system to view, download and print copies of the relevant documents. I think it's about 8 cents per page, whether you end up using it or not. Note the creditors and submit an offer to each of them for the intellectual property rights to the company for the materials you seek and see if they agree to it. Wouldn't hurt to send the same offer to the bankruptcy trustee. Good luck.

September 1, 2010, 12:59 PM
It's too bad... they made good stuff.

September 2, 2010, 01:31 AM
PM sent.

September 19, 2010, 08:18 PM
As an update to all my fellow THR members I just wanted to let you know that 2RCo has acquired all of Ajax's CNC machines and the lion's share of all their remaining stock and equipment. I'm currently in the process of retooling this machinery for the new 2RCo line that will be introduced in mid November.

In the next few weeks we will start selling off the inventory we acquired from the Ajax Liquidation through the 2RCo website.

The Former Ajax Facility

The First Truck with Ajax's Former Machinery on it's way to it's new home in Missouri.

September 19, 2010, 09:33 PM
Good to hear - Ajax had some good products. Hopefully you'll be able to incorporate them into your current product line (and BTW, if you come across any grips for a 1903 Colt .32 auto...:D)

September 19, 2010, 09:45 PM
The last few years, Ajax sold grips that didn't fit correctly, and some that were cheap trash. Their customer service was nonexistent. That's why they went out of business. Hopefully you will go through the grips and toss the cheap crap.

September 19, 2010, 11:13 PM
Hoghunting: I plan on continuing with the quality control we already have at 2RCo as well as our no questions asked refund on all 2RCo products as long as they are returned in as shipped condition.

September 20, 2010, 06:12 AM
Quote: The last few years, Ajax sold grips that didn't fit correctly, and some that were cheap trash. Their customer service was nonexistent. That's why they went out of business. Hopefully you will go through the grips and toss the cheap crap.

+1, particularly on the custommer service......

Full Metal Jacket
September 20, 2010, 07:13 AM
The last few years, Ajax sold grips that didn't fit correctly, and some that were cheap trash. Their customer service was nonexistent. That's why they went out of business. Hopefully you will go through the grips and toss the cheap crap.

+2. they were selling some real garbage.

September 20, 2010, 12:28 PM
Well folks, at 2RCo we're putting a good chunk of change into getting this new line launched and we believe in putting out a quality product. Although we bought out the Ajax machinery we'll be using it to manufacture our own designs and increase our output in order to be a bigger player in the industry.

Since Ajax had 40+ years in business and put out some excellent products throughout the years I won't comment on their mistakes. All I can do is let you guys (and gals) know that when you buy 2RCo branded products we will stand behind them.


Raleigh Ritter

September 20, 2010, 12:58 PM
Good to hear. Keep us updated... if you can match their former quality (before they apparently went downhill; I've loved the stuff I got from them) you'll earn a lot of customers, IMO. :cool:

September 20, 2010, 05:35 PM
Good to hear their machinery isn't going to a scrap heap. Wish you the best of luck.

I had hits and misses with Ajax grips. I really like the slim 'gunfighter' grips they did in buffalo horn. The first set of ivorex grips I bought from them cracked after just a few months of use. I sanded the cuss out of them and they might end up on another Vaquero someday. The look and feel was nice but the plastic had flaws.

Please be sure to let us know when you start making new stuff, there's a ton of us out there that will give your goods a spin.

September 20, 2010, 09:31 PM
Hope you have great success with the increase in your business, Raleigh. I didn't mean it as a slam on you. Ajax had different ownership a few years ago, and the business tanked. I am in the N Texas area, and saw them regularly at the gun shows. When ownership changed, the grips went from being very well made to cheap junk. With your attitude and business plan, you should do very well.

September 20, 2010, 11:58 PM
Hoghunting - I took no offense at your comments. THR will get the first look at the new products. I'll have a five table Endcap at the November Wanenmacher Tulsa Gun show. Fingers crossed we'll have some of the new line ready to go by then.

December 6, 2010, 08:27 PM
Update for my friends at THR:

Part of the New Line is going into production this week. Not unlike most other business pursuits ever undertaken things have progressed slower than anticipated.

There should be some pretty interesting news in the next couple weeks and you guys and gals will hear it first. :D

Thanks for you help, support and advice.

Raleigh Ritter

December 6, 2010, 10:06 PM
I have a pair of buffalo horn Gunfighter style on a Vaquero also...no problems here. In fact, I didn't even realize they went under.

Best of luck to you 2R...

January 11, 2011, 09:14 PM
A little update for you folks. 2R LLC, you know us as 2RCo, has acquired the Ajax™ Name and Trademarks, primarily including Pearlite™. If you've been following this thread you know we already had the equipment and remaining inventory. I got clearance from my attorneys to proceed with the new product a while back but wanted to wait until I had the new production ready to roll. We are in full production of 1911 grips and several S&W, Ruger, Colt SAA and Taurus models will be coming on line by the end of the month at latest.

Just thought I'd share a picture of the first Pearlite™ production 1911 grips to be made in Missouri.


Thanks for the encouragement and support from one THR member to the rest!

Raleigh Ritter

January 11, 2011, 09:59 PM
I checked out your website, great prices on some good lookin grips. Do you make any slim grips?

January 12, 2011, 02:10 PM
Cool, thanks for the update, 2RCO. :cool:

January 13, 2011, 12:30 AM

I have actually been messing around with different thicknesses on the Pearlite 1911 grips and may offer thicker and thinner options on a custom basis. We have some pretty interesting stuff in development and THR will get the news first.



January 28, 2011, 12:29 AM
The most popular of the Polymer grips are in full production and will be available soon. Pearlite™ will be limited to the #12 for the 1911 for the initial relaunch.

Once again thanks to THR,


February 28, 2011, 09:32 PM
My fellow THR members the New Ajax Line is ready and available. We just put them on the website.


Thanks for all the encouragement!


March 1, 2011, 12:48 PM
Cool! Thanks for the update.

March 1, 2011, 01:50 PM
Congrats on your expansion.

March 2, 2011, 10:01 PM
Thanks for the update and great luck on the business!

March 5, 2011, 10:37 AM
Thanks guys!

March 5, 2011, 11:42 AM
Wow!!! GOOD GOING!!! It's great to hear of new businesses flourishing in this economy! You must be doing something right.
I don't have a 1911, but if I did, I'd be sorely tempted.

March 6, 2011, 09:56 PM
Thanks Ben,

We are proud to be keeping a quality product alive and made in the USA.
As I stated earlier in the thread we do stand behind our products. We will be introducing more products as we go along and I will keep everyone updated.


March 8, 2011, 02:17 PM
Price Blast: All of our Current grips are now under $50 plus $5 per order shipping.

May 15, 2011, 03:17 PM
My new grips from 2RCO fit well. I Scuffed them with Scotch Brite pad and stained them with Rustoleum metal primer.. Hard to tell from the photo, but I think they look pretty close to Bone grips now..Top grip is stained, bottom is untouched.


May 15, 2011, 03:30 PM
Wow that looks great. :cool:

May 19, 2011, 09:05 PM
I added another coat of brown and black stain, I think I'm done now..

March 7, 2012, 05:16 PM
Hi all sorry to drag up this old thread but I just wanted to tell you about mt recent purchase from Ajax Grips. The good news super fast shipping. Now the bad. I bought a set grips for my S&W J Frame from them and went to put them on the gun and one of the panels was warped. I took me 1 hr to file it down to fit. I got it about 98% to fit right. Sure I could have did the whole send it back thing and I'm sure they would have sent me another set but I just didn't want to deal whit that. After reading about the New and improved Ajax I went for it. I was going to post even if I was happy with them to let all you guys know that too. I guess some things never change:(

March 8, 2012, 04:29 PM
Up date. I talked to the owener of Axjax today and I'm happy to report he's going to make things right and send me out a new set of grips tomorrow. We talked for a bit and he seems like a nice guy to deal with. I would definitely buy from him again.

March 8, 2012, 05:59 PM
Good to hear.

Elm Creek Smith
March 27, 2012, 11:59 PM
Want K-frame Ajax grips, round and square butt. When you get a chance, of course.


February 26, 2013, 07:10 PM
hello, how can i see 2rco colt saa grips, i need a white grips with colt medalions...

February 27, 2013, 06:32 AM
Did you try his website shown in his signature block?


March 24, 2013, 10:28 PM
We have SAA grips but currently don't offer medallions due to licensing concerns. We are actively pursuing licensing but hitting a brick wall.

As far as K frame grips we have Cocobolo for now.

Thanks for your support folks!

Raleigh Ritter

March 24, 2013, 10:30 PM
Dudlee I like what you've done with our product.

If you enjoyed reading about "Ajax Grips" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!