CZ 75B Safety to De-cocker Conversion


PDA






Ben86
September 23, 2010, 03:20 PM
I recently bought a cz75b, with the omega trigger, and I would like to convert the safety to a de-cocker. Can this be done, and what will it take? I would have got the 75bd version to start with, but I got a sweet deal on this one used. It was practically NIB for $449.

I thought I'd get comfortable with de-cocking the gun manually, but after about a week I am not, so I'd love to put a de-cocker on this thing.

If anyone knows how it is done I would appreciate your help.

If you enjoyed reading about "CZ 75B Safety to De-cocker Conversion" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
JDGray
September 23, 2010, 04:04 PM
Give these guys a call:)
http://czcustom.com/index.aspx

Babarsac
September 23, 2010, 04:13 PM
According to CZ Custom you can't.

From their FAQ

Is there any way to convert a non-decocker to a decocker?
No, the cuts in the frame are different.

Bummer

gb6491
September 23, 2010, 04:19 PM
You need the decocking levers, decocking lever spring, and decocking lever spring pin.
http://cz-usa.com/assets/files/cz75omega_en.pdf


Babarsac,
The OP has the Omega trigger; it's a whole different ball game in regards to converting between decocker and safety.

Regards,
Greg

Babarsac
September 23, 2010, 04:31 PM
Interesting. I just picked up my CZ-75 from the fun-store and will have to check which type of trigger it has.

Ben86
September 23, 2010, 06:29 PM
I called the custom shop and they said they can only do it on the p07 models. :(

Being the stubborn cuss that I am I'm still going to ask various custom shops until I get a consensus no answer. I don't see why it can't operate on a pin in the same area as the safety pin.

gb6491
September 23, 2010, 08:57 PM
I think the problem is that the parts needed to do this on the 75B Omega are not available:
http://www.czforumsite.info/index.php?topic=29459.0
http://www.czforumsite.info/index.php?topic=31282.0
Regards,
Greg

ckone
September 24, 2010, 02:27 AM
Just try to trade it for a "BD" model, you'll probably find lots of takers as usually it's the other way around, guys wanting the non-decocker version to get the better trigger and C&L'd option for games (I've heard that since they're a bit more complicated the decocker versions aren't quite as easy to perform trigger jobs on, could be different with the omegas, not sure).

Ben86
September 24, 2010, 10:41 AM
I think I might just keep it as is. Now that I realized it is safer to de-cock it to half-cock instead of full (and quite unnecessary to de-cock it fully) its growing on me.

I would use it single action with the safety, but I'm really not into safeties (glock ruined me).

So I don't have a fancy de-cocker lever, oh well. ;) It's still one of the best guns I've ever bought.

Trebor
September 24, 2010, 05:49 PM
Funny, I asked the same question on Rec.guns back in '98 or so...

I wound up leaving my 75 B "as is" and got used to it pretty quick.

Just funny to see someone else asking the same question.

Ben86
September 24, 2010, 09:56 PM
Just funny to see someone else asking the same question.

It does seem to be a pretty common question. :o

Teppo Oni
November 30, 2010, 04:25 AM
CZ75B convert to CZ75BD
i want to convert a stainless CZ75B to a decocker only
i hate guns with a safety
has anyone tried it and will the parts fit?
looks like i need
parts number 11,17,60,61,62,63 and maybe 10
11 sear
17 disconnector
60 decocking lever controller
61 decocking lever
62 decocking lever spring
63 fixing insert
10 ejector

If you enjoyed reading about "CZ 75B Safety to De-cocker Conversion" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!