Good mid-powder 180 grn 10mm load


PDA






Fatelvis
September 29, 2010, 12:04 PM
What is a good "middle of the road" power load for the 10mm, using a 180 grn jhp bullet? Thanks-

If you enjoyed reading about "Good mid-powder 180 grn 10mm load" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Glock20
September 29, 2010, 12:37 PM
Fatelvis - I've had good accuracy with 180gr JHP mid 10mm auto loads using -
Hodgdon's (online) data of 6.0 grains of TiteGroup & 6.4 grains of Universal. Both are max for the powder listed on the site, but are mid + loads for a 10mm at a little over 1100 fps.
You should start at the lower end of Hodgdon's data and work up.

I've used Montana Gold's 180gr JHP and Hornady's XTP's with these loads and they are both very accurate out of my Glock 20.

noylj
September 29, 2010, 08:58 PM
5.3gn 231/HP38
8.5gn AA5
6.6gn Herco
5.7gn Bullseye
6.8gn Power Pistol
5.6gn TiteGroup
5.2gn WST
COL 1.250-1.260"

If you enjoyed reading about "Good mid-powder 180 grn 10mm load" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!