.32acp lead load
deadeyedog270
October 27, 2010, 07:24 PM
I found some 75gr lead bullets on line but I can not find any load data for them, dose any one have any data for this I have Greendot and titegroup for powders
If you enjoyed reading about ".32acp lead load" here in TheHighRoad.org archive, you'll LOVE our community. Come join
TheHighRoad.org today for the full version!
rfwobbly
October 27, 2010, 07:27 PM
Look at the Hodgdon load center...
http://data.hodgdon.com/
NCsmitty
October 27, 2010, 08:16 PM
Use at your own risk, but 2.0gr of either Green Dot or Titegroup should net around 800fps. Do not go above 2.2gr and 1.8gr might be a good starting load.
Use this data in modern firearms only.
NCsmitty
jcwit
October 27, 2010, 08:20 PM
Do you have reloading manuals?
deadeyedog270
October 27, 2010, 09:44 PM
I checked Hodgdon befor I posted they only list for 71gr fmj I have a Lee second edition but that dose not give them powders or bullet wait and a buddy barrowed my Lyman manual and have not beed able to get it or a hold of him do to family issues on his end
jcwit
October 27, 2010, 10:13 PM
OK! Just checked my Lyman Cast Bullet Manual and give the following for Green Dot for both 77 grain and 84 grain Rd, nose bullets.
77 grain Rd. Nose- 1.6 gr. = 705 fps 2.4 = 895 fps
84 grain Rd. Nose- 1.6 gr. = 680 fps 2.3 = 845 fps
Nothing given for Titegroup
deadeyedog270
October 28, 2010, 06:12 PM
thanks jcwit
If you enjoyed reading about ".32acp lead load" here in TheHighRoad.org archive, you'll LOVE our community. Come join
TheHighRoad.org today for the full version!
vBulletin® v3.8.6, Copyright ©2000-2013, Jelsoft Enterprises Ltd.