Hercules 2400 For Rifle Loads?
parker51
February 6, 2011, 02:51 PM
I've got about 7lbs of Hercules 2400 that I would like to use up this Summer in some type of rifle load if possible. I know it works okay in magnum pistol rounds but was hoping to find a good rifle load if possible. I have a Ruger Red Hawk in 44 Magnum but it would take me 10 years to shoot this much powder in this gun. I alos have a Ruger 44 Magnum carbine that I'm pretty sure will work with this powder but again this isn't one of my favorite range guns. I recently read some posts on other sites where folks claim they use this powder in other rifle calibers (45-70 and .223). Has anyone ever tried this powder for loading .243 or .308? Do you think it would work in a Winchester 243 WSSM? Any suggestions for use (besides fertilizer)? Thanks!
If you enjoyed reading about "Hercules 2400 For Rifle Loads?" here in TheHighRoad.org archive, you'll LOVE our community. Come join
TheHighRoad.org today for the full version!
243winxb
February 6, 2011, 03:46 PM
1999 Alliant Powder gudie - 308win-Sierra 150 gr spitz-2.600" minimum OAL-2400-25.0gr maximum-Fed 210 primer-2215fps- Brass Federal-36,700 CUP-24" barrel. There are other loads for 223&45-70 & 30-06 &458win mag. 222rem-7mmbr rem-7mm/08-30/30-35rem- Contact Alliant for data> http://www.alliantpowder.com/questions/default.aspx
Walkalong
February 6, 2011, 07:23 PM
Do you think it would work in a Winchester 243 WSSM? I wouldn't think so. Checked Alliants Website (http://www.alliantpowder.com/reloaders/default.aspx)?
parker51
February 6, 2011, 08:19 PM
I wouldn't think so. Checked Alliants Website (http://www.alliantpowder.com/reloaders/default.aspx)?
I figure you're right. I fired off an e-mail to Alliant to see if they recommend using this powder in any rifle loads. If not, I'll be loading a lot of 44 magnum rounds over the next several months. Thanks for the input.
parker51
February 6, 2011, 08:22 PM
1999 Alliant Powder gudie - 308win-Sierra 150 gr spitz-2.600" minimum OAL-2400-25.0gr maximum-Fed 210 primer-2215fps- Brass Federal-36,700 CUP-24" barrel.
Thank you! I may give this one a try once I hear back from Alliant.
Maj Dad
February 6, 2011, 08:41 PM
If you're considering lead bullet loads, the horizon just broadened for you... Check the manuals - it's my standard cast boolit powder in 30-06, 30-40 & 308; 303 & 8mm as well. As you mentioned, it's great for 44 mag, and also for 44-40. Before you put in on the tomatoes, PM me & we'll work out a swap for some Miracle-Gro... ;)
If you enjoyed reading about "Hercules 2400 For Rifle Loads?" here in TheHighRoad.org archive, you'll LOVE our community. Come join
TheHighRoad.org today for the full version!
vBulletin® v3.8.6, Copyright ©2000-2013, Jelsoft Enterprises Ltd.