illustrated complete dis/re-assembly for the Ruger MKII


PDA






yzguy
January 24, 2003, 09:28 PM
http://www.1bad69.com/ruger/internals.htm
I just thought I'd post my few pages of illustrated instructions for everyone....

The above page has links at the top for illustrated instructions for:
MKII parts diagram
field stripping (and a Problems/Cause/Solution section for field stripping)
extractor removal/replacement
Removing internal pieces, such as the trigger, hammer, sear, and disconnector

let me know if I left anything out, or have any typos...

If you enjoyed reading about "illustrated complete dis/re-assembly for the Ruger MKII" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Kruzr
January 25, 2003, 01:08 AM
Nice job yzguy!

(Some of that text looks familiar ;) )

Johnpl
January 25, 2003, 08:01 AM
Never having seen it shown before, now I know why people say it is difficult! Good job explaining and demonstrating how it is to be done.

yzguy
January 25, 2003, 11:38 AM
ok, maybe some of it was borrowed from a few places.... :) I did do most of it, and all the pics are of mine... :)

Kruzr
January 25, 2003, 11:47 AM
Never having seen it shown before, now I know why people say it is difficult! Good job explaining and demonstrating how it is to be done.

John, don't lose sight of the fact that those instructions are for complete disassembly not field stripping for cleaning.

yzguy
January 25, 2003, 05:37 PM
yeah, that is here (field stripping instructions, that is):
http://www.1bad69.com/ruger/field_strip.htm

it is not that hard at all...

kalibear45
January 26, 2003, 05:44 AM
Dude, way to go! I'm printing your webpage as I type this...

Kahr carrier
January 27, 2003, 07:14 AM
Good job .:D

gunsmither
February 6, 2003, 01:19 AM
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=383&item=2704244268&rd=1

This is a link to a GREAT TOOL for field stripping the Ruger .22 Auto Pistols. SAFE SHOOTIN ! gunsmither:)

yzguy
February 6, 2003, 09:55 AM
I think he ment to post this one:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2708169707

I have not seen it or used it, but it looks pretty good from the pics...

gunsmither
February 6, 2003, 12:03 PM
:) I shouldn't be doing things late at night; can't even paste in the right url! Thanks yzguy! Joe :D

Kruzr
February 6, 2003, 01:30 PM
The absolute best completely non-marring tool I've found for opening the mainspring latch on my Mark2 is a plastic cable tie in a loop. You can "customize" the size of the loop to your liking. Hold it by the fastener end and slip the loop under the latch and pull.

Great value also, you can buy 10 of them for about a buck.

Kahr carrier
February 7, 2003, 10:03 AM
Yup that works well

yzguy
February 7, 2003, 10:29 AM
I use a large paperclip... :)

If you enjoyed reading about "illustrated complete dis/re-assembly for the Ruger MKII" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!