Pressure testing ?


PDA






harley45
January 2, 2004, 06:46 PM
Is there a lab out there that will allow a person to send handloads to be pressure tested? I've got some 9x23 loads I'd like to see about.

If you enjoyed reading about "Pressure testing ?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Kamicosmos
January 2, 2004, 07:38 PM
I know JD Jones's SKS Industries does pressure testing. No idea what the cost would be though.

Clark
January 2, 2004, 09:39 PM
You could use Dane's whoosy loads, or my hot loads for the 9x23mm, or something in between.

harley45
January 2, 2004, 10:10 PM
I'm usuing a load close to the ones you sent me but was just curious where I was at.

WESHOOT2
January 3, 2004, 01:21 AM
Yes, but for the life of me I don't immediately remember who; recent, too.
Arrgh!

sm
January 3, 2004, 01:35 AM
Hey WESHOOT, I thought I got this from you...or that post??

Lost River Ballistic Technologies
http://www.lostriverballistic.com/shopcart/LRB_Gun_Smith.htm

Clark
January 3, 2004, 02:43 AM
CAUTION: The following post includes loading data beyond currently published maximums for this cartridge. USE AT YOUR OWN RISK. Neither the writer, The High Road, nor the staff of THR assume any liability for any damage or injury resulting from use of this information.

9x23mm

1) Win data: 6.3 gr 231, 125 gr, 46,000 psi, 1300 fps

2) Dane Burns Data: 9 gr 3N37, 125 gr. 1452 fps

3) my data w/ Win brass, 1.36" in a Tokarev:
a) 10 gr 3N37, 130 gr. primer falls out. poor velocity
b) 16 gr Power Pistol, 158 gr. no pressure problems, highest velocity and best load

harley45
January 3, 2004, 04:44 PM
Webshoot2 let me know if you come up with it I e-mailed the above link so we'll see.

JohnK
January 6, 2004, 03:58 PM
Western Powders, http://www.westernpowders.com/pages/lab.htm (http://) will test ammo for you for $54.97.

FireInTheHole
January 6, 2004, 08:00 PM
Thanks for the link johnK.... I might have to try that sometime.

Clark
January 7, 2004, 12:09 PM
John K,
Thanks, I was unable to retrieve that location in my worn out brain.

So the head bottle washer at Handloads.Com is here in Western WA?
I live on Mercer Island's tough South end where the rats are big and the dogs are mean.

You are always so positive.... I want to switch to your brand of coffee.

JohnK
January 8, 2004, 01:08 PM
Maybe that's the trick Clark - no coffee :) Whatever brand my parents drank when I was growing up was so foul I never developed a taste for the stuff.

I'm just a tad NE of you, up near Duvall - but I work just across the water from Mercer Island in Bellevue.

Clark
January 8, 2004, 08:36 PM
I built a home on acrage [with windows that opened in the correct direction for shooting] North of Monroe and lived there in the 80's and 90's.

When I would leave work in the Bellevue/Redmond area electronics companys, I would only be half way home when I went through Duvall.

Just North of Duvall there is Cherry Creek pheasant release site. I have had some fun there:)

kidcoltoutlaw
March 23, 2004, 02:34 AM
for a pressure testing rig.i already have a p35 chronograph can i get an addon pressure tester for it,thanks,keith

If you enjoyed reading about "Pressure testing ?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!