KAK
March 22, 2011, 06:11 PM
After looking everywhere I have decided to build one. This is the setup, p226 and TLR2. Easily switchable from OWB to IWB, but mostly designed for IWB until TX gets open carry. I am making a somewhat clone of the ever popular Raven Phantom. I could never wait that long for a holster, it bothers me that they wont just hire another person instead of letting it backlog for 4 months. :rolleyes:
I have all of the tools necessary and am expirenced with their uses so Im not lost when it comes to building stuff.
This is the plan: :D
http://www.ravenconcealmentsystems.com/images/Sig%20220%20+%20TLR1.JPG
This is the holster style. The only thing I am going to change is that I am going to fold over the muzzle area instead of using 2 seperate sheets.
I will be using very thin Concealex in .06 thickness (Carbon Fiber) because it will be IWB I dont want a beefed up holster.
http://www.knifekits.com/vcom/images/conceal-cf.jpg
I am going to use 8 chicago screws with 1/4" heads to apply retention pressure and to allow adjustment of clip location.
Since apparently concealex makes bad clips im going to buy some nice metal ones, I am going to hang 2 of these one on each side side of the holster to go up and over the waistband and hook to the belt.
http://www.knifekits.com/vcom/images/sheathclip_bk_1_600.jpg
And the best part is it will only cost me about $15 to make and I will have supplies left over for perhaps a matching iphone case. What do yall think?
I have all of the tools necessary and am expirenced with their uses so Im not lost when it comes to building stuff.
This is the plan: :D
http://www.ravenconcealmentsystems.com/images/Sig%20220%20+%20TLR1.JPG
This is the holster style. The only thing I am going to change is that I am going to fold over the muzzle area instead of using 2 seperate sheets.
I will be using very thin Concealex in .06 thickness (Carbon Fiber) because it will be IWB I dont want a beefed up holster.
http://www.knifekits.com/vcom/images/conceal-cf.jpg
I am going to use 8 chicago screws with 1/4" heads to apply retention pressure and to allow adjustment of clip location.
Since apparently concealex makes bad clips im going to buy some nice metal ones, I am going to hang 2 of these one on each side side of the holster to go up and over the waistband and hook to the belt.
http://www.knifekits.com/vcom/images/sheathclip_bk_1_600.jpg
And the best part is it will only cost me about $15 to make and I will have supplies left over for perhaps a matching iphone case. What do yall think?
