magnum primer in 38 spl or not
suzukisam
April 15, 2011, 12:39 AM
I have a lot of magnum primers, and I was wondering with a bullseye load could I get away with mag primers. it's a plus p gun but I'll only be shooting plinkers for the most part.. so pressures even if higher should still be low
If you enjoyed reading about "magnum primer in 38 spl or not" here in TheHighRoad.org archive, you'll LOVE our community. Come join
TheHighRoad.org today for the full version!
Grumulkin
April 15, 2011, 05:57 AM
As long as you're not running on the ragged edge of high pressure, using magnum primers would be fine.
BigN
April 15, 2011, 06:12 AM
Yes, as long as you're on the low end of the fps/pressure scale. Use up the magnum primers...
Husker_Fan
April 15, 2011, 11:35 AM
During the panic buying, this came up a lot since magnum primers were all some people could get their hands on. Just keep away from the max loads and it will work fine.
Hondo 60
April 17, 2011, 01:13 AM
Same as those above.
Stay south of max & magnum primers work fine.
During the shortage, that was all I could find.
Still have 9 1/2 of my fingers... ;)
gamestalker
April 17, 2011, 08:36 AM
Yaba Dabba Doo! Load on the light side and all will be A-OK. Actually, I would send them to me for proper disposal, just to be safe and all.
parisite
April 17, 2011, 08:40 AM
Magnum primers are just fine even at today's listed maximum published loadings with the low pressures of the 38 Special.
If you enjoyed reading about "magnum primer in 38 spl or not" here in TheHighRoad.org archive, you'll LOVE our community. Come join
TheHighRoad.org today for the full version!
vBulletin® v3.8.6, Copyright ©2000-2013, Jelsoft Enterprises Ltd.