[Another_Kelley]

I have trimmed what seems like tens of thousands of 223 cases now with my Wilson Timmer, and as hard as it is to admit, I'm just now getting to the point where I want to incorporate a drill or some sort of motorized assistance to rotate the trimmer head for me. Anything really...there has to be someone out there training for the zombie apocalypse that has a rodent running on a wheel hooked up to some gearing and wizardry that gets the job done. Pictures of your set-up are welcomed...Thanks fellas.

[EddieNFL]

Last item on the page.

http://www.sinclairintl.com/.aspx/pid=38505/Product/Sinclair_Upgrade_Items_for_Wilson_Trimmer_Cutters

[USSR]

Yeah, the little crank handle gets "tedious" when you are talking about trimming large quantities of brass. I bought the Sinclair power adaptor and hooked my cordless drill to it. Works great.

Don

[Another_Kelley]

Thanks guys. Forgive my ignorance....I see two separate units there that both have a quick-release attachment(05-4650, and WSA). It appears as though I need the 'power adapter' but I'm unsure after looking at the 'screw driver adapter'. Are both the 'screwdriver adapter' and 'power adapter' made to thread in place of the crank handle? What's the diff?

[dbarnhart]

I have the Wilson Screwdriver Adapter found on this page:

http://www.sinclairintl.com/.aspx/pid=38505/Product/Sinclair_Upgrade_Items_for_Wilson_Trimmer_Cutters

You remove the hand crank from the cutter and screw the Screwdriver Adapter on in its place. I chuck up in my cordless drill. I can trim about 450 cases/hour.

[GW Staar]

...training for the zombie apocalypse that has a rodent running on a wheel hooked up to some gearing and wizardry that gets the job done. Pictures of your set-up are welcomed...Thanks fellas.

While not a Wilson my setup with a $70 Forster might give you some ideas in principle! My feet replace the rodent running tho...:)

I'd bet money the Wilson could do the same thing with a tad more work.

Check it out. (http://www.thehighroad.org/showthread.php?t=510882)

Does Wilson make a 3-way cutter for their trimmer yet?

[USSR]

Actually, what I have is the screw driver adaptor (WSA).

Don