Missouri bullet co. : 9mm swc data with win 231 ???

PDA



jcerillo70
July 11, 2011, 11:46 AM
Anyone have data for the 9pm 125 gr swc? Or do I use the same as the lead rn load, which for me is 4.3 gr

I'm using win 231 powder and mixed head stamp brass
If you enjoyed reading about "Missouri bullet co. : 9mm swc data with win 231 ???" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Galil5.56
July 11, 2011, 12:49 PM
Load to a good, reasonable OAL with that charge, and you are all set... But, you might consider dropping a few tenth's, and go from their as well since you are using a different component from what you used before.
MissouriBullet
July 11, 2011, 12:55 PM
Our customer Jake Harris posted his W231 loads on our Facebook page over the weekend -

http://www.facebook.com/missouribullet
jcerillo70
July 11, 2011, 01:58 PM
Jake Harris ‎3.8 and 4.0 gr of HP-38, in both the cone and swc. Ruger sr9c and no leading. ----(OAL) Pretty sure it was 1.25" for the cone and 1.08" for SWC. Mixed head stamps.

Thats my start load 3.8 anything under 4 my gun wont cycle. Ill probably go 4.2 win 231. The oal seems low, i wish i had my lyman book back from dads, it probably has this bullet in there
jcerillo70
July 11, 2011, 02:26 PM
Tell me why i just found a copy of my thread on the jihad network???

http://www.tookshow.net/vb/showthread.php?t=788862

Thats not good
MissouriBullet
July 11, 2011, 05:24 PM
Tell me why i just found a copy of my thread on the jihad network???

http://www.tookshow.net/vb/showthread.php?t=788862

Thats not good
Ummmm, allah akbar, y'all?

A very strange thing indeed.
Quoheleth
July 11, 2011, 08:28 PM
That's freaky wierd...the jihad network? Yikes...

Better bust out the tinfoil hat, just in case.

Q
ArchAngelCD
July 12, 2011, 05:14 AM
With a 124/125gr lead bullet I charge 4.0gr W231. You can go as high as 4.4gr W231 with a COAL of somewhere around 1.125" depending on the bullet profile. The 4.0gr load works well for me and is quite accurate but if you're using the ammo in a pistol with a very heavy slide you might need a stiffer charge.
squarles67
July 12, 2011, 09:22 AM
Ummmm, allah akbar, y'all?

I don't care who ya are....that's funny right there......
squarles67
July 12, 2011, 09:31 AM
This is not a recomendation to do so but I've gone as high as 4.9g HP-38 with MB 125g LRN at OAL 1.06 in my CZ-75B with out issue or pressure signs. Velocity was 1159 but it leaded too much for me.

After lots of testing with my CZ I ended up using 5.6g AA#5, very accurate in my pistol with minimal leading. AVG-1069 ES-18.46 SD-6.24
If you enjoyed reading about "Missouri bullet co. : 9mm swc data with win 231 ???" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!