August 17, 2011, 07:04 PM
So Full autos cant be manufactured since 1986, so does this include drop in kits to make a semi auto into full auto? for example the cardboard in the ak47 trick that makes them full auto.
August 17, 2011, 07:24 PM
A machine gun is defined in the NFA as a "gun or a set of parts to convert a gun to fire more than one shot per trigger pull" (obviously that's paraphrased) so unless you registered your piece of cardboard as a machine gun on or before the cut off in 1986, you're out of luck. (and that would now be one EXPENSIVE piece of cardboard! :what:)
You could always try it, of course. Just don't expect any sympathy from the judge when you get arrested and convicted of possession/manufacture of an unregistered MG. IIRC the ATF has successfully argued that a shoe lace constituted a MG before...
August 17, 2011, 07:27 PM
There are two possible answers to this question.
1) There are full-auto trigger packs, "Drop-In-Auto-Sears" (DIAS), "Lightning-Links" and similar assemblies which have been registered -- themselves -- as machine guns (prior to May 1986) which can be installed in a legal "Title I" firearm allowing it to run full-auto. If you own one of these transferable items, you can swap them between guns. Some of these, especially the H&K trigger packs, can run several different models of a series of rifle, so -- as long as you don't mind buying several moderately expensive semi-auto rifles -- you can sort of have a whole stable of machine guns with just one registered piece/assembly.
2) Adding parts, filing things, bending springs, adding a piece of cardboard or wire, or otherwise fooling with a gun to make it run full-auto is DEFINITELY completely illegal, and usually a really dangerous idea. On the one hand, you are absolutely making an unregistered Title II firearm (10 years in federal prison, $250,000 fine). On the other hand, you're likely making your rifle slam-fire and/or go "runaway" and this will destroy the gun and hurt you sooner or later.
August 17, 2011, 08:14 PM
well i thought it was worth a try on finding out thanks for the info.
vBulletin® v3.8.6, Copyright ©2000-2014, Jelsoft Enterprises Ltd.