Loctite on Charter Arms ejector rod?


PDA






10mm Mike
August 28, 2011, 08:34 PM
I have a new Charter Arms Pitbull and after alot of dry firing the ejector rod head (part number 25 in the parts diagram (http://www.charterfirearms.com/products/Bulldog_MagPug.pdf)) starts to come loose and makes it difficult to open the cylinder.

I'm thinking an easy solution to this is to use blue loctite on it. Is this ok or is there some reason why I shouldn't do this?

If you enjoyed reading about "Loctite on Charter Arms ejector rod?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
GRIZ22
August 28, 2011, 08:37 PM
I have done it years ago and have had no problem.

MedWheeler
August 28, 2011, 09:39 PM
Go for it. It's also not uncommon with some Taurus/Rossi models, including my M66.

Deltaboy
August 28, 2011, 09:42 PM
That is what gunsmith grade loc-tite is for it is called the Blue one now.

10mm Mike
August 29, 2011, 01:19 AM
excellent. thanks guys.

retDAC
August 29, 2011, 02:30 AM
Remember to clean and degrease the threads before using Loctite.

If you enjoyed reading about "Loctite on Charter Arms ejector rod?" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!