Would this load be safe to start? 357 Sig


PDA






viper7342
September 8, 2011, 12:20 AM
The Alliant Powder Reloaders Guide lists a loading Using a Speer 125 Grain GDHP, 8 Grains Unique, OAL 1.135". My Questions is, would I be safe using 7.5 Grains of Unique with the same OAL under a 124 grain Berrys Plated Flat Point Bullet? This is what the FAQ on Berrys Web Site Says for reference.

How do I load Berry's Preferred Plated Bullets?


Plated bullets occupy a position between cast bullets and jacketed bullets.
They are soft lead, but have a hard outer shell on them. When loading plated
bullets we have found best results using low- to mid-range jacketed data in
the load manual. You must use data for a bullet that has the same weight and
profile as the one you are loading. Do not exceed mid-range loads. Do not
use magnum loads.

Any Help all of you with more experience can provide me with will be greatly appreciated...
Thank You,
viper7342

If you enjoyed reading about "Would this load be safe to start? 357 Sig" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
If you enjoyed reading about "Would this load be safe to start? 357 Sig" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!