biogenic
September 23, 2011, 09:27 PM
Any of you guys use Missouri bullet 93gr? What's you favorite recipe ??
|
biogenic September 23, 2011, 09:27 PM Any of you guys use Missouri bullet 93gr? What's you favorite recipe ??
If you enjoyed reading about "Makarov reloading" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
res45 September 23, 2011, 10:51 PM I like 3.5 grs. W231 for a nice target shooting load in my PA-63 I've used up to 4.0 grs. but it a bit snappy and accuracy is not as good. Another thread http://www.thehighroad.org/showthread.php?t=588933 biogenic September 23, 2011, 11:00 PM I like 3.5 grs. W231 for a nice target shooting load in my PA-63 I've used up to 4.0 grs. but it a bit snappy and accuracy is not as good. Another thread http://www.thehighroad.org/showthread.php?t=588933 __________________ Thanks much for the info and link ! JDGray September 24, 2011, 09:16 AM Missouri bullet 93gr lrn, 3.6gr 231, .975" oal Hornady 95gr XTPs, 4.0gr 231, .965" oal 1000fps These are my loads:) armarsh September 24, 2011, 09:22 AM I like 4.0 grains of Green Dot. I have not shot Missouri's though. Either Berry's or Hornady XTP's. jcwit September 24, 2011, 10:17 AM I believe I would do a search thru the powder manufactures rather than take load data from unknown folks on the internet, even tho their intentions are well ment. Just MHO Hondo 60 September 24, 2011, 10:56 PM I agree with jcwit. No offense to the helpful thr members, but what if they mistyped or looked at the data wrong? Just my 2¢ biogenic September 24, 2011, 11:12 PM I agree with jcwit. No offense to the helpful thr members, but what if they mistyped or looked at the data wrong? Just my 2¢ 3.6 to 4.0 grain is within range. I always double check my loads with my manuals anyway... I do appreciate your concern however. JDGray September 25, 2011, 01:52 PM The man asked for recipies, he got ours:) He certainly don't have to use them, and better check them against published data. (which he did) Mine result from what my Lee Pro Auto Disc cavities will drop within the min-max spectrum;)
If you enjoyed reading about "Makarov reloading" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
|