LNL AP mods 1


PDA






sugarmaker
October 14, 2011, 08:06 PM
Some pictures of some mods on my press

1st is a modified pusher for the case feed - it is very reliable, does not jam. Machined from 2024 bar stock.

2nd is a dillon powder check actuated by the LNL powder drop mechanism - made from a cut off l bracket.

3rd is the on press trimmer - simultaneous with a redding body die size. Trims, inside and outside chamfer.

4th is the result of the trim. It's sub .001" accurate, nearly perfect chamfwer and deburr, takes 1 sec per .006" of trim or about 2 seconds of pause on top of the stroke to be safe. turns at 600rpm. Chips vacuumed by shop vac w/ attachment, not shown.

5 second cycle time from empty case to loaded round including trim, no inside case neck lube (using lee collett on station 1)

A few more interesting things if anyone is interested.

If you enjoyed reading about "LNL AP mods 1" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
dbarnhart
October 14, 2011, 09:04 PM
I am envious of your machining skills.

If you enjoyed reading about "LNL AP mods 1" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!