Small Base Die Set Up Procedure


PDA






BBDartCA
October 24, 2011, 06:56 PM
Is setting up a SBD in the press any different than a standard RCBS die? Can't find anything on their site or a live body on the phone. Thanks

If you enjoyed reading about "Small Base Die Set Up Procedure" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!
Walkalong
October 24, 2011, 07:40 PM
Nope, the change is internal in the die, set it up the same.

USSR
October 24, 2011, 08:36 PM
^^^^^ - Yep! Like any die for a bottle neck rifle cartridge, you set up the die to have it place the case shoulder where it should be in relation to the rifle chamber.

Don

R.W.Dale
October 24, 2011, 08:45 PM
^^^^^ - Yep! Like any die for a bottle neck rifle cartridge, you set up the die to have it place the case shoulder where it should be in relation to the rifle chamber.

Don

This

Except if you want ammunition to go into multiple guns use a saami case gauge instead of an individual rifle chamber

posted via tapatalk using android.

USSR
October 24, 2011, 09:43 PM
This

Except if you want ammunition to go into multiple guns use a saami case gauge instead of an individual rifle chamber

Or - Set your die up to fit your rifle with the shortest chamber.;)

Don

R.W.Dale
October 24, 2011, 11:10 PM
Or - Set your die up to fit your rifle with the shortest chamber.;)

Don

That's fine till you end up with a rifle with a yet shorter chamber.

Ya know saami puts out these specifications for a reason. If it fits in a gauge it will shoot in ANY rifle of that chambering that's not out of spec.
posted via tapatalk using android.

If you enjoyed reading about "Small Base Die Set Up Procedure" here in TheHighRoad.org archive, you'll LOVE our community. Come join TheHighRoad.org today for the full version!